AQZ262 Datasheet, PDF (1/5 Pages) Nais(Matsushita Electric Works) – POWER PhotoMOS RELAYS (High capacity type)

POWER PhotoMOS RELAYS
(High capacity type)
UL CSA
Pending Pending
PhotoMOS
RELAYS
Max. 43.0
1.693
Max. 9.0
.354
Max. 32.0
1.260
mm inch
FEATURES
1. High capacity type power photoMOS
relay.
Can switch a wide range of currents and
voltages. Can control various types of
loads, from very small loads to a maxi-
mum 6A AC/DC current for sequencers,
motors, and lamps.
2. Low ON resistance and high sensi-
tivity.
Low ON resistance of less than 50 mW on
a par with mechanical relays (AQZ262).
High sensitivity LED operate current of 3
mA (at 25°C 77°F ).
3. AC/DC dual use
Bi-directional control is possible. There is
no need to differentiate depending on the
load as was necessary with the conven-
tional SSR.
4. 4-pin SIL type.
4-pin SIL type of (L) 43.0 mm × (W) 9.0
mm × (H) 32.0 mm (L) 1.693 inch× (W)
.354 inch× (H) 1.260 inch.
5. Low-level off state leakage current
In contrast to the SSR with an off state
leakage current of several milliamps, the
PhotoMOS relay features a very small off
state leakage current of only 10mA even
at the rated load voltage.
6. Controls low-level analog signals
The triac, photocoupler, or SSR cannot be
used to control signals of less than sever-
al hundred mV. The high capacity type
power PhotoMOS relay feature extremely
low closed-circuit offset voltage to enable
control of low-level analog signals without
distortion.
TYPICAL APPLICATIONS
• Mercury relay replacement
• Railroad, traffic signals
• Compact motors, lamps, heaters
• OA equipment
• Measurement instruments
TYPES
AC/DC type
Output rating*
Load voltage
Load current
60 V
6.0 A
400 V
1.0 A
* Indicate the peak AC and DC values.
Part No.
AQZ262
AQZ264
Packing quantity
Inner carton
Outer carton
20 pcs
200 pcs
RATING
1) Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
Symbol
AQZ262
AQZ264
LED forward current
IF
50 mA
LED reverse voltage
VR
3V
Input
Peak forward current
I FP
1A
Power dissipation
P in
75 mA
Load voltage (Peak AC)
VL
60 V
400 V
Output
Continuous load current (Peak AC)
IL
Peak load current
I peak
6.0 A
10.0 A
1.0 A
3.0 A
Power dissipation
P out
3.0 W
Total power dissipation
PT
3.0 W
I/O isolation voltage
Viso
1,500 V AC
Operating
Temperature limits
Storage
T opr
Tstg
–40°C to +85°C –40°F to 185°F
–40°C to +100°C –40°F to 212°F
Remarks
f = 100Hz, Duty factor = 0.1%
100 ms (1shot), VL = DC
Non-condensing at low temperatures
626