ALE12B05 Datasheet, PDF (1/4 Pages) Nais(Matsushita Electric Works) – 16A Power Relay For Micro wave oven

16A Power Relay For
Micro wave oven
VDE
LE
LE RELAYS
12.4
FEATURES
4. Low operating power
28.6
.488
1. Ideal for magnetron and heater
• Nominal operating power: 400mW/
1.126
loads
200mW (High sensitive type)
24.9
.980
28.6
1.126
2. Excellent heat resistance
12.4 ^{• This satisfies UL coil insulation class B/}
.488 _{class F available}
5. A wide variety of types
• Product line consists of 4 types with dif-
ferent shapes and pins
3. High insulation resistance
6. Conforms to the various safety
24.9 • Creepage distance and clearances be-
standards:
.980 _{tween contact and coil: Min. 8 mm .315}
• UL/CSA, TÜV, VDE approved and
inch
SEMKO available
• Surge withstand voltage: Min. 10,000V
mm inch
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switch-
ing capacity
Rating
(resistive load)
Expected life
(min. operations)
Max. switching
power
Max. switching
voltage
Max. switching
current
Mechanical
(at 180 cpm)
Electrical
(at 20 cpm)
(Resistive load)
1 Form A
100 mΩ
Silver alloy
16 A 277 V AC
4,432 V A
277 V AC
16 A
2 × 10⁶
10⁵
Coil
Type
Nominal operating power
Standard
400 mW
High sensitive
200 mW
Remarks
∗ Specifications will vary with foreign standards certification ratings.
*¹ Measurement at same location as “Initial breakdown voltage” section.
*² Detection current: 10mA
*³ Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*⁴ Excluding contact bounce time.
*⁵ Half-wave pulse of sine wave: 11 ms; detection time: 10 µs
*⁶ Half-wave pulse of sine wave: 6 ms
*⁷ Detection time: 10 µs
*⁸ Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 24).
Characteristics
Max. operating speed
(at rated load)
Initial insulation resistance*¹
Initial breakdown
voltage*²
Between open
contacts
Between con-
tacts and coil
Initial surge voltage between contact
and coil*³
Operate time*⁴
(at nominal voltage) (at 20°C 68°F)
Release time (with diode)*⁴
(at nominal voltage) (at 20°C 68°F)
Temperature rise (at nominal voltage)
(resistance method, contact current
16 A, 20°C 68°F)
Functional*⁵
Shock resistance
Destructive*⁶
Vibration
resistance
Functional*⁷
Destructive
Conditions for operation,
transport and storage*⁸
(Not freezing and condens-
ing at low temperature)
Unit weight
Ambient temp.
Humidity
20 cpm
Min. 1,000 MΩ (at 500 V DC)
1,000 Vrms for 1 min.
4,000 Vrms for 1 min.
Min. 10,000 V
Max. 20ms
Max. 20ms
Max. 25ms
(200 mW type)
Max. 55°C
Max. 45°C
(200 mW type)
Min. 200 m/s²{20 G}
Min. 1,000 m/s²{100 G}
10 to 55Hz
at double amplitude of 1.5mm
10 to 55Hz
at double amplitude of 1.5mm
–40°C to +85°C
–40°F to +185°F
5 to 85% R.H.
Approx. 17 g .60 oz
TYPICAL APPLICATIONS
• Microwave ovens
• Refrigerators
• OA equipment
ORDERING INFORMATION
Ex. A LE
1
2
B
12
Product name Contact arrangement
Terminal shape
LE
1: 1 Form A 2: TMP type/PCB side three terminals
7: 1 Form A
(includes one dummy terminal)
(200 mW) 3: TMP type/PCB side three terminals
4: TMP type/PCB side four terminals
5: PCB type (No tab terminals)
UL/CSA, TÜV, VDE approved type is standard.
Note: Standard packing; Carton: 100 pcs. Case 500 pcs.
Coil insulation class
B: Class B insulation
F: Class F insulation
Coil voltage, V DC
05: 5 18: 18
06: 6 24: 24
09: 9 48: 48
12: 12
43