M24758-13C20 Datasheet, PDF (1/2 Pages) Glenair, Inc. – Adapter for MS-3155 Type Connectors

MIL-PRF-24758-13
Adapter for MS-3155 Type Connectors
M24758 - 13 C 20
Basic No.
Conduit Size Code, Table I
Connector Dash No., Table II
1.50 (38.10)
Max
MS3155 design
standard applies
A thread
L
DE
Coupling nut
APPLICATION NOTES
1. Assembly identified with manufacurer’s code
identification number (Glenair, part number and
classification code 490).
2. The M24758-13 adapter couples connectors listed
in table ll to M24758-2, M24758-3 or M24758-4
series conduit fittings.
3. The coupling nut end of this adapter shall conform
to military standard MS3155 (navy), ‘Connector,
electric, rear accessory design standard.” MS3155
takes precedence over this specification.
4. Configuration of adapter may change based on the
variance of diameters E and K.
5. Material / Finish:
Adapter, coupling nut, 316 / electroless nickel, matte
finish.
6. Metric dimensions (mm) are indicated in parentheses.
7. See M24758-2, -3, -4 torque values for C thread.
K
C thread for
M24758A-2, -3, -4 fittings
Adapter
TABLE I
CONDUIT
C
L
K
SIZE CLASS - 2A +.03 (.76)
DIA
CODE THREAD
-.00
MIN
A .438-28 UNEF .21 (5.25) .245 (6.22)
B .688-24 UNEF .25 (6.35) .495 (12.57)
C .938-20 UNEF .31 (7.87) .745 (18.92)
D 1.250-18 UNEF .37 (9.40) .995 (25.27)
E 1.563-18 UNEF .37 (9.340) 1.245 (31.62)
F
1.875-16 UN .43 (10.92) 1.495 (37.97)
G
2.375-16 UN .43 (10.92) 1.995 (50.67)
H
2.875-16 UN .43 (10.92) 2.495 (63.37)
J .563-24 UNEF .25 (6.35) .370 (9.40)
K .813-20 UNEF .31 (7.87) .620 (15.75)
L
3.375-16 UN .43 (10.92) 2.995 (76.07)
© 2007 Glenair, Inc.
CAGE Codes 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
26
E-Mail: [e-mail]