MU9C8328A Datasheet, PDF (1/16 Pages) MUSIC Semiconductors – Ethernet Interface

Preliminary Data Sheet
MU9C8328A Ethernet Interface
APPLICATION BENEFITS
GENERAL DESCRIPTION
Ø Single port 10 MHz Ethernet address parsing,
filtering, and learning at wire speed
Ø Glue-free interface between the MUSIC LANCAM^®
Family and AMD, National, Motorola, or similar
Ethernet Controllers having an NRZ serial data port
Ø Selectable filtering and learning decisions on DA
and SA compares
Ø Supports aging with built-in LRU purge routine
Ø Supports cascaded MUSIC LANCAM series for
long station lists
Ø Host processor port for LANCAM initialization and
housekeeping activities
Ø Supports system clock rates from 20 MHz to
33 MHz
Ø Compatible with MU9C8328
Ø 100-pin PQFP package
Ø 5 Volt operation
The MU9C8328A speeds up bridging operations using
Ethernet controller chips with serial NRZ data outputs,
such as AMD’s MACE™, National’s SONIC™, and
Motorola’s QUICC™ controllers, by parsing the Ethernet
frame independently of the Ethernet controller device, and
notifying it whether to accept or reject the incoming frame.
The MU9C8328A supports both positive and negative
filtering on the Destination address and learning of new
Source addresses, by efficiently controlling the compare
activities of the MUSIC LANCAM Family. Filtering and
learning routines are user configurable. These routines
are automatically invoked by the internal state machine
based on the contents of the incoming frame and the
configuration settings. For aging and other housekeeping
routines, the MU9C8328A provides the proper
sequencing and timing of LANCAM accesses for an
external processor.
The MU9C8328A receives serial NRZ data from the
Ethernet controller chip, finds the Start delimiter, and loads
the DA and SA into registers. The DA is sent to the
LANCAM for filtering and, depending on the filter action
LANCAM INTERFACE
SERCLK
SERDAT
/NETRDY
/REJECT
NETW ORK
INT ERFA C E
STATE
MA CHINE
CONTROL
STATUS
OP -CODE
ASSOCIATED DATA
/CS
/AS
/WE
4
A(3-0)
PROCESS OR
INT ERFA C E
D(15-0)
REA DY
/INT
SYSCLK
/RESET
Block Diagram
MUSIC Semiconductors, the MUSIC logo, the phrase “MUSIC Semiconductors”, and LANCAM are registered trademarks of MUSIC
Semiconductors. All other trademarks are registered by their respective owners. MUSIC is a trademark of MUSIC Semiconductors.
Note: This document version has not completed MUSIC’s internal approval process, therefore it should be
rechecked with a released version or with factory personnel.
24 June 1999 Rev. 0.8 Draft