TZ03N100E169B00 Datasheet, PDF (7/45 Pages) Murata Manufacturing Co., Ltd. – Ceramic Trimmer Capacitors

T13E.pdf !Note • Th!is PNDoFteca•taPlolegasisedroewadnlroaatdinegdafnrodm!thCeAwUeTbIOsiNte(ofof rMsutoraratageM, aonpuefraactitnugri,nrgatcinog.,,ltsdo.ldTehreinregf,omreo,uint’tsinsgpaencdifichaatniodnlisnga)reinstuhbisjeccatttaolocghatongpereovreonut rsmprookdiuncgtsanind/iot rmbauyrnbiengd,isectco.ntinued without advance notice. Please check with our
sales repres_•en_Tt_ha_istiv_ce_as_tao_lor _gpr_ho_ad_suc_ot_ne_lyn_tg_yi_pn_ie_ce_ar_ls_spb_ee_cfo_ifr_ice_ao_tir_od_ne_sri_bn_eg_c. _{ause there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.}
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
07.3.1
Continued from the preceding page.
1
s Land Pattern
2.2
1.2
Tolerance: ±0.1
in mm
s Temperature Profile
Reflow Soldering Profile
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
T5
T3
T2
T4
T1
t2
Limit Profile
t3
Standard Profile
t1
time (s)
Standard Profile
Pre-heating
Heating
Peak
temperature
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
(T3)
150 to 180°C 60 to 120sec. 220°C 30 to 60sec. 245±3°C
Cycle
of reflow
2time
wSoldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to q)
T3
T2
T1
t2
Standard Profile
t1
time (s)
Standard Profile
Pre-heating
Heating
Peak
Cycle
temperature
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
(T3)
of reflow
150°C 60 to 120sec. 183°C
30sec. 230 +5/-0°C 1time
Limit Profile
Pre-heating
Temp. (T1) Time (t1)
Heating
Temp. (T4) Time (t3)
Peak
temperature
Cycle
(T5)
of reflow
150 to 180°C 60 to 120sec. 230°C 30 to 50sec. 260 +5/-0°C 2time
Solder Iron
Temperature of soldering iron tip
350±10°C
Soldering time
3sec. max.
Standard Profile
Soldering iron power output
30W max.
Cycle of solder iron
1time
s Notice (Storage and Operating Condition)
1. Do not use the trimmer capacitor under atmosphere
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
2. Before using trimmer capacitor, please store under
the condition of -10 to +40 degree C and 30 to
85%RH.
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6. Do not use the trimmer capacitor under the
conditions listed below.
(1) Corrosive gasses atmosphere
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
(2) In liquid (ex. water, oil, medical liquid,
organic solvent, etc.)
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
6