MA18101 Datasheet, PDF (6/6 Pages) Murata Manufacturing Co., Ltd. – HIGH FREQUENCY CERAMIC CAPACITORS

APPLICATION SPECIFIC CAPACITORS
HIGH FREQUENCY CERAMIC CAPACITORS
MA/MB Series
SPECIFICATIONS
Dissipation Factor
Temperature Coefficient
MA/MB 18/28; 0.05% maximum
MA 58/68; 0.15% maximum @ 1.0VRMS (f = 1 MHz)
MA 78/88; 2.5% maximum @ 1.0VRMS maximum (f = 1kHz)
MB28 Series P90±30ppm/°C, (–55°C to +175°C)
MA 18/28 Series P90 ±20ppm/°C, (–55°C to +125°C)
MA 58/68 Series; COG (0 ±30ppm/°C, –55°C to +125°C)
MA 78/88 Series; ±15% maximum (–55°C to +125°C)
Insulation Resistance
Dielectric Test Voltage
Capacitance Drift
Aging
Environmental Tests
Shock
Vibration
Moisture Resistance
Solderability
Immersion
Barometric Pressure
Resistance to Soldering Heat
Thermal Shock
Life
Marking
MA/MB 18/28 1000K M Ohms at +25°C, 100K M Ohms at +125°C
MA 58/68 1000K M Ohms at +25°C, 100K M Ohms at +125°C
MA 78/88 100K M Ohms or 1000 M Ohm ␮F min., whichever is less (@ 25°C)
10K M Ohms or 100 M Ohms ␮F min., whichever is less (@ 125°C)
MA/MB 18/28/58/68/78/88, 250% of WVDC for 5 seconds
Meets or Exceeds MIL-PRF-55681 (Does not apply for MA 78/88)
Negligible for MA/MB 18/28/58/68, MA 78/88; 2.5% per decade maximum
MIL-STD-202
Method 213, Condition J
Method 204, Condition B
Method 106
Method 208
Method 104, Condition B
Method 105, Condition B
Method 210, Condition B
Method 107, Condition A
Method 108, Condition F
Standard MA/MB product is unmarked
TAPE AND REEL PACKAGING
DIMENSIONS: mm
B0
Unit: mm
1.5
+0.1
–0
A0
4.0 ± 0.1 4.0 ± 0.1
2.0 ± 0.1
1.75 ± 0.1
3.5 ± 0.05
8.0 ± 0.3
2.75
Direction of feed
PACKAGING:
Case 1 – 3,000 pcs.
Case 2 – 1,000 pcs.
Cover tape
NOTE: 1 Ao & Bo are determined by maximum specified length
and width of components plus 0.016 ± 0.008, plus the additional
requirement that components not be allowed to rotate more than
20° within the cavity clearance or whichever condition occurs first.
Embossed
carrier
Embossment
CONDUCTIVE TAPE
Advantages
Benefits
Conductive
Prevents static charge build-up
Flexibility
Insures against crazing, cracking
and brittleness
Dimensional strength
Drive loading will not elongate
sprocket holes
Dimensional stability
Smooth, reliable running on
pick and place machines
Other packaging options available — Consult Factory
CG01-J
ELECTRICAL PROPERTIES
Property
Value
Resistivity
5 x 10⁵ ohm/square
Electrostatic
Decay Time
At 50% RH@21°C
0.01 Sec.
Test Method
ASTM D-257
ASTM D-257
Typical Values
123