RBC-1217-D48P-C Datasheet, PDF (5/10 Pages) Murata Manufacturing Co., Ltd. – RBC-12/17-D48 Series Quarter Brick, Regulated Bus Converters

RBC-12/17-D48 Series
Quarter Brick, Regulated Bus Converters
RECOMMENDED FOOTPRINT (VIEW THROUGH CONVERTER)
REF: DOSA STANDARD SPECIFICATION
FOR QUARTER BRICK DC/DC CONVERTERS
FINISHED HOLE SIZES
@ PINS 1-3
(PER IPC-D-275, LEVEL C)
0.048-0.062
(PRI)
TOP VIEW
CL
(SEC)
37.3
1.47
CL
0.100MIN
@ 1-4, 8
FOR PIN
SHOULDERS
1
8
7.6
2
0.300
CL
7.6
4
0.300
3
25.4
1.00
58.9
2.32
50.8
2.000
IT IS RECOMMENDED THAT NO PARTS
BE PLACED BENEATH CONVERTER
(HATCHED AREA)
FINISHED HOLE SIZES
@ PINS 4 & 8
(PER IPC-D-275, LEVEL C)
0.070-0.084
1. ALTERNATE PIN LENGTHS AVAILABLE
(CONTACT MURATA-PS FOR INFORMATION)
2. COMPONENTS SHOWN FOR REF ONLY
3. DIMENSIONS ARE IN INCHES WITH NEAREST
METRIC EQUIVALENT SHOWN AS [mm]
4. PIN LOCATION DIMENSIONS APPLY AT
CIRCUIT BOARD LEVEL
www.murata-ps.com/support
Dimensions are in inches (mm shown for ref. only).
Third Angle Projection
Tolerances (unless otherwise specified):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 2˚
Components are shown for reference only.
MDC_RBC-12/17-D48.B02 Page 5 of 10