|
UHE Datasheet, PDF (3/16 Pages) Murata Manufacturing Co., Ltd. – Isolated, High Effi ciency, 1.6" × 2" 2-10 Amp, 12-30 Watt DC/DC Converters | |||
|
◁ |
PART NUMBER STRUCTURE
UHE Series
Isolated, High Efï¬ciency, 1.6" à 2"
2-10 Amp, 12-30 Watt DC/DC Converters
U HE - 3.3 / 7500 - D48 N - C
Output Conï¬guration:
U = Unipolar
High Efï¬ciency
Nominal Output Voltage:
1.2, 1.5, 1.8, 2.5, 3.3, 5, 12 or 15
Maximum Rated Output
Current in mA
RoHS-6 hazardous substance compliant
(Does not claim EU exemption 7b, lead in solder)
On/Off Logic
Blank = Positive logic, standard
} N = Negative logic
R = See Below
optional, special order
NR = See Below
Input Voltage Range:
D12 = 9-18 Volts
Note: Some model number
combinations may not be available.
Contact Murata Power Solutions.
D24 = 18-36 Volts
D48 = 36-75 Volts
Q12 = 9-36 Volts
Q48 = 18-75 Volts
Options and Adaptations
Optional Functions and Part Number Sufï¬xes
The versatile UHE, 12-30W DC/DC converters offer numerous electrical and
mechanical options. Per the Ordering Guide on page 2, the trailing DXX or QXX
(where XX stands for 12, 24 or 48VIN) in each part number pertains to the base
part number. Part-number sufï¬xes are added after this input identiï¬cation,
indicating the selection of standard options. The resulting part number is a
"standard product" and is available to any customer desiring that particular
combination of options.
The On/Off Control function on pin 4 employs a positive logic (on = open or
"high," no sufï¬x). To request a negative logic on this pin/function, add an "N"
sufï¬x to the part number. Standard models have no pins in the pins 5 and 8
positions. For 5-10A models (1.2-5VOUT), ±Sense pin/functions can be added to
these positions (see pinout P52) by adding an "R" sufï¬x. An "NR" sufï¬x can be
added for both negative-logic and sense-pin options. See below.
Sufï¬x Description
Blank Positive logic On/Off Control function (pin 4), VOUT trim (pin 9),
no Sense pins, pin length 0.2 inches (5.08 mm).
N
Add Negative logic on the On/Off Control function, VOUT trim (pin 9),
no Sense pins.
R
Positive logic on the On/Off Control function, VOUT trim (pin 9), ±Sense
pins in the pin 5 and pin 8 positions (available for low VOUT models
only). Available under special order.
NR Negative logic on the On/Off Control function, VOUT trim (pin 9), +/â
Sense pins in the pin 5 and pin 8 positions (available for low VOUT
models only). Available under special order.
Alternate pin lengths are available under special order
T Alternate trim conï¬guration. Special order only.
-C Full RoHS-6 compliance.
-Y RoHS-5 hazardous substance compliance with lead exception. RoHS-5
compliance requires a scheduled quantity order. Not all RoHS-5 â-Yâ
models are available. Please contact Product Marketing for further
information.
Adaptations
There are various additional conï¬gurations available on UHE, 12-30W DC/DCs.
Because designating each of them with a standard part-number sufï¬x is not
always feasible, such are designated by MPS in assigning a 5-digit âadaptation
codeâ after the part-number sufï¬xes. Contact MPS directly if you are interested
in your own set of options/adaptations. Our policy for minimum order quantities
may apply. Consequently, the following products are offered for sale:
UHE-5/6000-D48N-30749
UHE-5/6000-D48N-30749-Y (RoHS-5)
Standard product, 48VIN, 5V/6A output with negative logic on the On/Off Control
function, modiï¬ed Trim function (5% trim up = 9.09kΩ, 5% trim down =
3.83kΩ, compatible with UEP-30750), integrated soft start and with input OVP
and thermal shutdown removed.
RoHS-5 compliance refers to the exclusion of the six hazardous substances
in the RoHS speciï¬cation with the excepion of lead. MPSâs RoHS-5 products
use all the conforming RoHS materials, however our solders contain lead.
UHE-3.3/7500-D48THL2-Y and
UHE-5/6000-D48THL2-Y (RoHS-5)
Special trim, conformal coating, 3.68mm pin length, positive on/off logic,
RoHS-5 hazardous substance compliance (with lead).
www.murata-ps.com/support
MDC_UHE_12-30W Series.C01 Page 3 of 16
|
▷ |