UEI25-120 Datasheet, PDF (3/11 Pages) Murata Manufacturing Co., Ltd. – Single Output Isolated 25-Watt DC/DC Converters

MECHANICAL SPECIFICATIONS
Case 75
UEI25-120 Series
Single Output Isolated 25-Watt DC/DC Converters
Dimensions are in inches (mm shown for ref. only).
Third Angle Projection
PIN #1
MOUNTING
PLANE
2.54
0.100
0.41
5.08
0.200
CL
#1
#2
#6
24.4
0.96
27.9
1.10
TOP VIEW
SIDE VIEW
8.1
0.32 MAX
BOTTOM VIEW
20.32
0.800
0.58
0.15 TYP
.040±.002
.071 .002 SHOULDER
6X AT PINS 1-6
RECOMMENDED
PRI-SEC BARRIER
Tolerances (unless otherwise specified):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 1˚
Components are shown for reference only.
INPUT/OUTPUT CONNECTIONS
Pin
Function P85
1
Positive Vin
2
Negative Vin
3
Positive Vout
4
Output Trim
5
Negative Vout
6
On/Off Control*
*The Remote On/Off can be provided
with either positive (P suffix) or nega-
tive (N suffix) polarity
These converters are plug-compatible to
competitive units. In case of pinout numbering
inconsistency, follow the pin FUNCTION, not
the pin number when laying out your PC board.
END VIEW
0.475
REF
0.30
10.16
0.400
CL
10.16
0.400
#3
CL
10.16
#4
0.400
6.3
0.25
#5
Standard pin length is shown. Please refer to
the Ordering Guide for alternate pin lengths.
www.murata-ps.com
email: [e-mail]
17 Aug 2010 MDC_UEI25-120.A02 Page 3 of 11