HPQ Datasheet, PDF (3/10 Pages) Murata Manufacturing Co., Ltd. – Isolated High Power Quarter Brick DC/DC Converters

PART NUMBER STRUCTURE
HPQ Series
Isolated High Power Quarter Brick DC/DC Converters
HPQ - 3.3 / 50 - D48 N B H - C
Family
Series:
High Power
Quarter Brick
Nominal Output Voltage
Maximum Rated Output :
Current in Amps
RoHS Hazardous Materials compliance
C = RoHS-6 (no lead), standard
Y = RoHS-5 (with lead), optional, special quantity order
Conformal coating (optional)
Blank = no coating, standard
H = Coating added, optional, special quantity order
Baseplate (optional)
Blank = No baseplate, standard
B = Baseplate installed, optional quantity order
Input Voltage Range:
D48 = 36-75 Volts (48V nominal)
On/Off Control Polarity
N = Negative polarity, standard
P = Positive polarity, optional
Note: Some model combinations may not be
available. Contact Murata Power Solutions for
availability.
Performance and Functional Specifications
All specifications are typical unless noted. See Note 1.
Input
Input Voltage Range
Recommended External Fuse
Start-Up Voltage
Undervoltage Shutdown
Overvoltage Shutdown
Reflected (Back) Ripple Current (Note 2)
Internal Input Filter Type
Reverse Polarity Protection (Note 15)
Input Current:
Full Load Conditions
Inrush Transient
Shutdown Mode (Off, UV, OT)
Output Short Circuit
No Load, 3.3Vout
Low Line (Vin=Vmin, 3.3Vout)
Remote On/Off Control (Note 5)
Positive Logic (“P” suffix)
Negative Logic (“N” suffix)
Current
See Ordering Guide.
10 Amps
33.0 Volts
32.0 Volts
None, see application notes.
20 mA pk-pk
Pi-type
See fuse information
See Ordering Guide.
0.05 A²Sec.
10 mA
50 mA
80 mA
5.21 Amps
ON = +2.5 V. to +15 V. max. or open pin
OFF = 0 to +1 V. max. or ground pin
ON = -0.1 V. to +0.8 V. max. or ground pin
OFF = +2.5 V. to +15 V. max. or open pin
1 mA
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
MDC_HPQ Series.A05 Page 3 of 10