HN-214D Datasheet, PDF (3/3 Pages) Murata Manufacturing Co., Ltd. – 2.4 GHz Frequency Hopping Wireless Data Modem

Built around the WIT2410 radio, the HN-210D has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-210D is
through a 115.2Kbps asynchronous serial port supporting a standard RS-232 interface. The HN-210D communicates over the air at 460.8Kbps and
supports both point-to-point and point-to-multipoint networks.
With a NEMA 4X weatherproof enclosure and aluminum mounting flange, the HN-210D is simple to install on the side of a building or attached to a mast.
With no antenna to connect, the HN-210D is simply mounted where the antenna would ordinarily be mounted. This removes the need for long antenna
cable runs, expensive in terms of both cost and performance.
The HN-210D comes with a 50-foot cable that connects to a DIN-rail mount serial adapter box (standard RS-232 serial 9-pin D connection) making
installation in equipment cabinets simple. The HN-214D comes with a 4-foot cable for use when long cable runs are not needed. The serial adapter box
also provides power to the HN-210D through a universal 110/220 50/60 wall-mount power supply (also included).
The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-210D ideal for a variety of "last mile" applications. For
applications requiring more antenna gain, the HN-210DX replaces the built-in patch antenna with an external TNC connector.
When paired with the Cirronet SNAP2410 family of products, the HN-210D provides a cost-effective link from remote devices to Ethernet/IP-based
applications. These applications include Intranet-based applications as well as Internet access. The HN-210D also is ideal for use in SCADA applications
as remote modems in multipoint configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power levels
of 10mW and 100mW allow the HN-210D to be used worldwide, even with the gain of the patch antenna.
Based on the Cirronet WIT2410 spread spectrum frequencyhopping radio, the HN-210D has exceptional multipath fade rejection as well as immunity to
jamming. The WIT2410 is a field proven performer that delivers robust, reliable, real-world performance.
The HN-210D is both FCC and CE marked. Operating in the 2.4GHz ISM band, the HN-210D can be deployed around the world without a license.
www.RFM.com E-mail: [e-mail]
©2008 by RF Monolithics, Inc.
Page 3 of 3
HN-210D - 4/10/08