HN-210X Datasheet, PDF (3/3 Pages) Murata Manufacturing Co., Ltd. – 2.4 GHz Frequency Hopping Wireless Data Modem

Built around the WIT2410 radio, the HN-210 has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-210 is
through a 115.2Kbps asynchronous serial port supporting a standard RS-232 interface; a USB version is also avaiable. The HN-210 communicates over
the air at 460.8Kbps and supports both point-to-point and point-to-multipoint networks. With a NEMA 4X weatherproof enclosure and aluminum mounting
flange, the HN-210 is simple to install on the side of a building or attached to a mast. With no antenna to connect, the HN-210 is simply mounted where the
antenna would ordinarily be mounted. This removes the need for long antenna cable runs, expensive in terms of both cost and performance.
The HN-210 comes with a 50-foot cable that connects to an indoor serial adapter box (included) that provides a standard RS-232 serial 9-pin D connection.
The HN-214 comes with a 4-foot cable for use when long cable runs are not needed. The serial adapter box also provides power to the HN-210 through a
universal 110/220 50/60 wall-mount power supply (also included).
The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-210 ideal for a variety of "last mile" applications. For
applications requiring more antenna gain, the HN-210X replaces the built-in patch antenna with an external TNC connector.
When paired with the RFM SNAP2410 family of products, the HN-210 provides a cost-effective link from remote devices to Ethernet/IP-based applications.
These applications include Intranetbased applications as well as Internet access. The HN-210 also is ideal for use in SCADA applications as remote
modems in multipoint configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power levels of 10mW
and 100mW allow the HN-210 to be used worldwide, even with the gain of the patch antenna.
Based on the M WIT2410 spread spectrum frequency-hopping radio, the HN-210 has exceptional multipath fade rejection as well as immunity to jamming.
The WIT2410 is a field proven performer that delivers robust, reliable, real-world performance.
The HN-210 is both FCC and CE marked. Operating in the 2.4GHz ISM band, the HN-210 can be deployed around the world without a license.
www.RFM.com E-mail: [e-mail]
©2008 by RF Monolithics, Inc.
Page 3 of 3
HN-210 - 4/10/08