OP4005B Datasheet, PDF (2/7 Pages) RF Monolithics, Inc – 622.08 MHz Optical Timing Clock

OP4005B Performance Parameters
The OP4005B has been developed to achieve high performance in five parameters critical to optical data communications applications:
Low Jitter and Phase Noise - low clock jitter (or low phase noise in the frequency domain) is critical to achieving low bit error rates in optical data
communications systems. The OP4005B provides very low free-running jitter and phase noise at the OC-12 clock rate, as shown in Figures 1 and 2. This
makes the OP4005B an excellent reference for the generation or regeneration of low-jitter clocks and data streams from the OC-12 rate up through OC-
768. The OP4005B achieves this performance over its full -40 to +85 °C operating temperature range using RFM's patented SAW oscillator architecture.
Single-Sideband Phase Noise
High Power Supply Noise Immunity - the OP4005B uses both differential active devices and differential SAW technology to minimize the effects of power
supply noise on jitter and phase noise, as shown in Figures 2 and 3. Optical data communications circuits must switch relatively high levels of current,
making power supply noise immunity an important clock requirement.
Controlled Tuning Characteristics - the OP4005B voltage tuning constant, K_V, is bounded between 140 and 300 ppm/V under locked conditions for
reference signals with ±100 ppm or better stability over the OP4005B's full operating temperature and supply voltage range. This allows a PLL based on
the OP4005B to be designed with a well-controlled loop bandwidth and damping factor, avoiding problems such a jitter peaking, etc. The voltage tuning
characteristic of the OP4005B is monotonic from 0 to 3.3 V, supporting reliable acquisition of phase lock. Figure 4 shows typical OP4005B tuning
characteristics.
www.RFM.com E-mail: [e-mail]
©2008-2010 by RF Monolithics, Inc.
Page 2 of 7
OP4005B - 2/4/10