|
LSS-T10-W12 Datasheet, PDF (2/8 Pages) Murata Manufacturing Co., Ltd. – Adjustable Output 10 Amp SIP-mount DC/DC Converter | |||
|
◁ |
LSS-T/10-W12
Adjustable Output 10 Amp SIP-mount DC/DC Converter
Performance Speciï¬cations and Ordering Guide â
ORDERING GUIDE
Output
Input
Root Model â
VOUT
(Volts)
IOUT
R/N (mVp-p)â Regulation (Max.)â
(Amps Power
VIN Nom.
max) (Watts) Typ. Max. Line Load (Volts)
Range
(Volts)
IIN,
IIN,
Efï¬ciency
no load full load
(mA) (Amps) Min. Typ.
LSS-T/10-W12 0.591 â 6 10 60 45 75 ±0.2% ±1.4% 12 4.5 â 13.8 80
4.48 91.5 93
Package
Case C72 â
0.41 Ã 0.65 Ã 0.4
(10.4 Ã 16.5 Ã 10.2)
Pinout
P73
â Dimensions are in inches (mm).
â All speciï¬cations are at nominal line voltage, VOUT = 5V and full load, +25 °C unless otherwise
noted. See detailed speciï¬cations. Output capacitors are 2 x 0.47 μF ceramic. Input cap is 22 μF.
I/O caps are necessary for our test equipment and may not be needed for your application.
â VIN must be 2V or higher than VOUT for 3.3 to 5V outputs.
PART NUMBER STRUCTURE
L SS - T / 10 - W12 - C
Output
Conï¬guration:
L = Unipolar
Low Voltage
Non-Isolated SIP
RoHS Hazardous
Substance Compliance
C = RoHS6 (does not
claim EU RoHS exemption
7bâlead in solder)
Output Voltage Range
T = Trimmable, 0.6 â 6 Volts
Wide Input Voltage Range
W12 = 4.5 â 13.8 Volts (10Amp)
Maximum Rated Output
Current in Amps
MECHANICAL SPECIFICATIONS
0.41
(10.4)
0.205 REF
(5.2)
0.65
(16.5)
0.38 MAX
(9.7)
0.24 MAX
(6.1)
INPUT/OUTPUT CONNECTIONS
LSS-T/10-W12
Pin
Function P73
1
Enable On/Off
2
+VIN
3
Ground
4
+VOUT
5
Output Trim
0.12 (3.0)
0.067 (1.7)
0.134 (3.4)
0.067 (1.7)
0.134 (3.4)
0.05
(1.3)
Figure 2 . LSS-T/10-W12 Series
Component locations are typical.
0.06 REF THK
(1.5)
.032 (0.8) ±.002 OR
.025 (0.6) ±.002 TYP
Dimensions are in inches (mm shown for ref. only).
Third Angle Projection
Tolerances (unless otherwise speciï¬ed):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 2Ë
Components are shown for reference only.
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_MDC_LSS-T10-W12.A05 Page 2 of 8
|
▷ |