LSN16A-D12 Datasheet, PDF (2/13 Pages) Murata Manufacturing Co., Ltd. – Single Output, Non-Isolated, 12VIN, 0.75-5VOUT 16 Amp in DC/DCs SIP Packages

LSN-16A D12 Models
Single Output, Non-Isolated, 12VIN, 0.75-5VOUT
16 Amp in DC/DCs SIP Packages
Performance Specifications and Ordering Guide ^~
ORDERING GUIDE
Root Model ^„
LSN-0.75/16-D12^‚
LSN-1/16-D12
LSN-1.2/16-D12
LSN-1.5/16-D12
LSN-1.8/16-D12
LSN-2/16-D12
LSN-2.5/16-D12
LSN-3.3/16-D12
LSN-5/16-D12
LSN-T/16-D12^ƒ
VOUT
(Volts)
0.75
1
1.2
1.5
1.8
2
2.5
3.3
5
0.75-5
IOUT
(Amps)
16
16
16
16
16
16
16
16
16
16
Max.
Power
(Watts)
12
16
19.2
24
28.8
32
40
52.8
80
80
Output
R/N (mVp-p)
Typ. Max.
45
65
45
65
45
60
30
45
30
45
30
45
35
50
40
55
50
75
55
75
Input
Regulation (Max.)
Line Load
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±0.1%
±0.25%
±0.25%
±0.25%
±0.25%
±0.25%
±0.25%
±0.25%
±0.25%
±0.25%
±0.25%
VIN Nom.
(Volts)
12
12
12
12
12
12
12
12
12
12
Range
(Volts)
10-14
10-14
10-14
10-14
10-14
10-14
10-14
10-14
10-14
10-14
IIN 
(mA/A)
39/1.21
39/1.45
45/1.70
54/2.09
53/2.49
59/2.93
60/3.38
69/4.37
75/6.52
80/7.0
Efficiency
Full Load ½ Load
Min. Typ. Typ.
80%
83%
85%
86%
87%
88%
90.5%
92.5%
94%
95%
82.5%
86%
89.5%
88%
90.5%
91%
92.5%
94.5%
96%
95.5%
86%
86%
90%
91%
92%
NA
94%
96%
95.5%
96.5%
Package
(Case,
Pinout)
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
B8/B8x, P59
~ Typical at TA = +25°C under nominal line voltage and full-load conditions, unless noted. All models
are tested and specified with external 22μF tantalum input and output capacitors. These capacitors
are necessary to accommodate our test equipment and may not be required to achieve specified
performance in your applications. See I/O Filtering and Noise Reduction.
 Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth and may be reduced with external
filtering. See I/O Filtering and Noise Reduction for details.
€ These devices have no minimum-load requirements and will regulate under no-load conditions.
Regulation specifications describe the output-voltage deviation as the line voltage or load is varied
from its nominal/midpoint value to either extreme.
 Nominal line voltage, no-load/full-load conditions.
‚ Contact MPS for availablilty.
ƒ LSN-T16-D12 efficiencies are shown at 5V out.
„ These are incomplete model numbers. Please refer to the Part Number Structure when ordering.
PART NUMBER STRUCTURE
L SN - 1.8 / 16 - D12 H J - C
Output
Configuration:
L = Unipolar
Low Voltage
Non-Isolated SIP
Nominal Output Voltage:
0.75, 1, 1.2, 1.5, 1.8, 2.5, 3.3
or 5 Volts or "T" selectable voltage
Maximum Rated Output
Current in Amps
RoHS-6 compliant*
J Suffix:
Reversed Pin
Vertical Mount
H Suffix:
Horizontal Mount
Input Voltage Range:
D12 = 10-14 Volts
(12V nominal)
* Contact MPS (DATEL) for availability.
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
MDC_LSN 16A D12 Models.B02 Page 2 of 13