LSN10A-D5 Datasheet, PDF (2/15 Pages) Murata Manufacturing Co., Ltd. – Non-Isolated, 5VIN, 1-3.8VOUT 10 Amp DC/DC In SIP Package

Single Output LSN-10A Models
Non-Isolated, 5VIN, 1-3.8VOUT
10 Amp DC/DC In SIP Package
Performance Specifications and Ordering Guide ~
Model ^ƒ
VOUT
(Volts)
IOUT
(Amps)
Output
R/N (mVp-p) 
Typ. Max.
Regulation (Max.) € _{VIN Nom.}
Line
Load (Volts)
LSN-1/10-D5
1
10
10
35
±0.1% ±0.25%
5
LSN-1.2/10-D5
1.2
10
10
35
±0.1% ±0.25%
5
LSN-1.5/10-D5
1.5
10
10
35
±0.1% ±0.25%
5
LSN-1.8/10-D5 ‚
1.8
10
10
35
±0.1% ±0.25%
5
LSN-2/10-D5
2
10
10
35
±0.1% ±0.25%
5
LSN-2.5/10-D5
2.5
10
10
35
±0.1% ±0.25%
5
LSN-3.3/10-D5
3.3
10
10
35
±0.1% ±0.25%
5
LSN-3.8/10-D5
3.8
10
10
35
±0.1% ±0.25%
5
Input
Range
(Volts)
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
4.5-5.5
IIN 
(mA/A)
50/2.43
50/2.85
50/3.48
50/4.09
50/4.51
50/5.50
50/7.25
50/8.0
Efficiency
Full Load ½ Load
Min. Typ. Typ.
83%
85%
87%
89%
89.5%
91%
92%
92%
86%
88%
90%
91.5%
92.5%
94%
95%
95%
89%
91%
92%
93.5%
94%
95.5%
96%
96%
Package
(Case,
Pinout)
B7/B7x, P59
B7/B7x, P59
B7/B7x, P59
B7/B7x, P59
B7/B7x, P59
B7/B7x, P59
B7/B7x, P59
B7/B7x, P59
~ Typical at TA = +25°C under nominal line voltage and full-load conditions, unless otherwise
noted. All models are tested and specified with external 22μF input and output capacitors.
These capacitors are necessary to accommodate our test equipment and may not be
required to achieve specified performance in your applications. See I/O Filtering and Noise
Reduction.
 Ripple/Noise (R/N) is tested/specified over a 20MHz bandwidth and may be reduced with
external filtering. See I/O Filtering and Noise Reduction for details.
€ These devices have no minimum-load requirements and will regulate under no-load condi-
tions. Regulation specifications describe the output-voltage deviation as the line voltage or
load is varied from its nominal/midpoint value to either extreme.
 Nominal line voltage, no-load/full-load conditions.
‚ Avaiilable with RoHS (Reduction of Hazardous Substances) compliance.
ƒ These are not complete model numbers. Please use the Part Number Structure when
ordering.
PART NUMBER STRUCTURE
L SN - 1.8 / 10 - D5 B H J - C
Output
Configuration:
L = Unipolar
Low Voltage
Non-Isolated SIP
RoHS-6
compliant*
J Suffix:
Reversed Pin
Vertical Mount
Nominal Output Voltage:
1, 1.2, 1.5, 1.8, 2, 2.5, 3.3, or 3.8V
H Suffix:
Horizontal Mount
Maximum Rated Output
B Suffix:
Current in Amps
No Remote Sense
See page 15 for details.
(Pin 3 removed)
Note: Not all model number
combinations are available.
Contact MPS.
Input Voltage Range:
D5 = 4.5 to 5.5 Volts
(5V nominal)
* Contact Murata Power
Solutions for availability.
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
MDC_LSN-10A D5 Models.B01 Page 2 of 15