LQG15HSR10J02D Datasheet, PDF (2/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) for High Frequency Multilayer Type LQG15HS Series (0402 Size)

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Multilayer Type
Data Sheet
2
Continued from the preceding page.
Part Number
Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQG15HS9N1J02p 9.1nH±5%
100MHz
LQG15HS10NJ02p 10nH±5%
100MHz
LQG15HS12NJ02p 12nH±5%
100MHz
LQG15HS15NJ02p 15nH±5%
100MHz
LQG15HS18NJ02p 18nH±5%
100MHz
LQG15HS22NJ02p 22nH±5%
100MHz
LQG15HS27NJ02p 27nH±5%
100MHz
LQG15HS33NJ02p 33nH±5%
100MHz
LQG15HS39NJ02p 39nH±5%
100MHz
LQG15HS47NJ02p 47nH±5%
100MHz
LQG15HS56NJ02p 56nH±5%
100MHz
LQG15HS68NJ02p 68nH±5%
100MHz
LQG15HS82NJ02p 82nH±5%
100MHz
LQG15HSR10J02p 100nH±5%
100MHz
LQG15HSR12J02p 120nH±5%
100MHz
LQG15HSR15J02p 150nH±5%
100MHz
LQG15HSR18J02p 180nH±5%
100MHz
LQG15HSR22J02p 220nH±5%
100MHz
LQG15HSR27J02p 270nH±5%
100MHz
Operating Temperature Range: -55°C to +125°C
Only for reflow soldering.
300mA
300mA
300mA
300mA
300mA
300mA
300mA
200mA
200mA
200mA
200mA
180mA
150mA
150mA
150mA
140mA
130mA
120mA
110mA
0.26ohm
0.26ohm
0.28ohm
0.32ohm
0.36ohm
0.42ohm
0.46ohm
0.58ohm
0.65ohm
0.72ohm
0.82ohm
0.92ohm
1.2ohm
1.25ohm
1.3ohm
2.99ohm
3.38ohm
3.77ohm
4.94ohm
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
8
100MHz
3400MHz
3400MHz
3000MHz
2500MHz
2200MHz
1900MHz
1700MHz
1600MHz
1200MHz
1000MHz
800MHz
800MHz
700MHz
600MHz
600MHz
550MHz
500MHz
450MHz
400MHz
I Q-Frequency Characteristics (Typ.)
80
1.0nH
60
40
20
0
100
3.3nH
270nH
10nH
120nH ^56nH
22nH
1000
Frequency (MHz)
10000
I Inductance-Frequency Characteristics (Typ.)
1000
100
10
1
270nH
120nH
56nH
22nH
10nH
3.3nH
1.0nH
0.1
100
1000
Frequency (MHz)
10000
I !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/