GRM216R71H102KA01D Datasheet, PDF (173/182 Pages) Murata Manufacturing Co., Ltd. – Chip Monolithic Ceramic Capacitors

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Sep.25,2013
Notice
Continued from the preceding page.
2. Land Dimensions
2-1. Chip capacitors can be cracked due to the stress of
PCB bending, etc. if the land area is larger than
needed and has an excess amount of solder.
Please refer to the land dimensions in table 1 for flow
soldering, table 2 for reflow soldering, table 3 for
reflow soldering for LLA Series, table 4 for reflow
soldering for LLM Series.
Please confirm the suitable land dimension by
evaluating of the actual SET / PCB.
Chip Capacitor
c
Land
b
a
Solder Resist
Table 1 Flow Soldering Method
Part Number
Dimensions
Chip (LgW)
GQM/GR3/GRJ/GRM Series 18 size
GQM/GR3/GRJ/GRM Series 21 size
GR3/GRJ/GRM Series 31 size
LLL Series 21 size
LLL Series 31 size
1.6g0.8
2.0g1.25
3.2g1.6
1.25g2.0
1.6g3.2
Flow soldering can only be used for products with a chip size of 3.2x1.6mm or less.
Table 2 Reflow Soldering Method
Part Number
Dimensions
GJM/GRM Series 02 size
GJM/GRM Series 03 size
GJM/GRM Series 15 size
GQM/GR3/GRJ/GRM Series 18 size
GQM Series 21 size
GR3/GRJ/GRM Series 21 size
GR3/GRJ/GRM Series 31 size
GR3/GRJ/GRM Series 32 size
GR3/GRJ/GRM Series 43 size
GR3/GRJ/GRM Series 55 size
LLL Series 15 size
LLL Series 1U size
LLL/LLR Series 18 size
LLL Series 21 size
LLL Series 31 size
GQM Series 22 size
Chip (LgW)
0.4g0.2
0.6g0.3
1.0g0.5 (within ±0.10)
1.0g0.5 (±0.15/±0.20)
1.6g0.8 (within ±0.10)
1.6g0.8 (±0.15/±0.20)
2.0g1.25
2.0×g1.25 (within ±0.10)
2.0g1.25 (±0.15)
2.0g1.25 (±0.20)
3.2g1.6 (within ±0.20)
3.2g1.6 (±0.30)
3.2g2.5
4.5g3.2
5.7g5.0
0.5g1.0
0.6g1.0
0.8g1.6
1.25g2.0
1.6g3.2
2.8g2.8
a
0.6 to 1.0
1.0 to 1.2
2.2 to 2.6
0.4 to 0.7
0.6 to 1.0
b
0.8 to 0.9
0.9 to 1.0
1.0 to 1.1
0.5 to 0.7
0.8 to 0.9
a
0.16 to 0.2
0.2 to 0.3
0.3 to 0.5
0.4 to 0.6
0.6 to 0.8
0.7 to 0.9
1.0 to 1.2
1.2
1.2
1.0 to 1.4
1.8 to 2.0
1.9 to 2.1
2.0 to 2.4
3.0 to 3.5
4.0 to 4.6
0.15 to 0.2
0.20 to 0.25
0.2 to 0.3
0.4 to 0.6
0.6 to 0.8
2.2 to 2.5
b
0.12 to 0.18
0.2 to 0.35
0.35 to 0.45
0.4 to 0.5
0.6 to 0.7
0.7 to 0.8
0.6 to 0.7
0.6
0.6 to 0.8
0.6 to 0.8
0.9 to 1.2
1.0 to 1.3
1.0 to 1.2
1.2 to 1.4
1.4 to 1.6
0.2 to 0.25
0.25 to 0.35
0.3 to 0.4
0.4 to 0.5
0.6 to 0.7
0.8 to 1.0
c
0.6 to 0.8
0.8 to 1.1
1.0 to 1.4
1.4 to 1.8
2.6 to 2.8
(in mm)
c
0.2 to 0.23
0.2 to 0.4
0.4 to 0.6
0.5 to 0.7
0.6 to 0.8
0.8 to 1.0
0.8 to 1.1
1.25
1.2 to 1.4
1.2 to 1.4
1.5 to 1.7
1.7 to 1.9
1.8 to 2.3
2.3 to 3.0
3.5 to 4.8
0.7 to 1.0
0.7 to 1.0
1.4 to 1.6
1.4 to 1.8
2.6 to 2.8
1.9 to 2.3
(in mm)
<Applicable to Part Number KR3/KRM>
Part Number
Dimensions
KRM Series 21 size
KRM Series 31 size
KR3/KRM Series 55 size
Chip (LgW)
2.0g1.25
3.2g1.6
5.7g5.0
a
1.0 to 1.2
2.2 to 2.4
2.6
b
c
0.6 to 0.7
0.8 to 1.1
0.8 to 0.9
1.0 to 1.4
2.7
5.6
(in mm)
Continued on the following page.
154