|
UWR-12-830-D12A-C Datasheet, PDF (1/6 Pages) Murata Manufacturing Co., Ltd. – Single Output, High Reliability, 2" x 1", 6-10 Watt, DC/DC Converters | |||
|
www.murata-ps.com
UWR Series
Single Output, High Reliability, 2" x 1", 6-10 Watt, DC/DC Converters
FEATURES
â Low Cost! Highly reliable!
â Proven SMT-on-pcb construction
â Designed to meet UL/EN/IEC 60950-1,
CAN/CSA-C22.2 60950-1
â Qual tested; HALT tested; EMC tested
â Small packages, 2" x 1" x 0.375"
â Standard pinouts
â 5, 5.2, 12 or 15 Volt outputs
â Choice of 3 wide-range inputs:
4.7-7.25 Volts
9-18 Volts
18-75 Volts
â Fully isolated, 1500Vdc guaranteed
â â40 to +100°C operation
â 5-side metal shielded cases with non-
conductive baseplates
â Modiï¬cations and customs for OEMâs
PRODUCT OVERVIEW
Placing reliability and cost considerations above all others, DATELâs new A-Series DC/DC
Converters combine straightforward circuit topologies, the newest components, proven SMT-on-pcb
construction, and highly repeatable automatic assembly techniques. Considering the critical low-cost
and long-term-reliability requirements of todayâs telecom, datacom and computer/networking appli-
cations, the A-Series may well be the most cost-effective DC/DCâs available today.
The single-output, 6-10 Watt Models of the A-Series deliver both high power densities and
impressive MTBFâs. Their superior durability is substantiated by a rigorous in-house qualiï¬cation
program including HALT (Highly Accelerated Life Testing). The goal of HALT is not to simulate ï¬eld
conditions but to expose devices to multiple excessive stresses with the intention of precipitating any
potential electrical, mechanical or process weaknesses.
Packaged in 2" x 1" x 0.375" shielded metal cases with non-conductive coatings, these fully
isolated (1500Vdc guaranteed) DC/DCâs offer excellent line/load regulation, full I/O protection, and
industry-standard pinouts.
Output voltages include 5, 5.2, 12 and 15 Volts. Input voltage ranges are either 4.7-7.25V ("D5A"
models), 9-18V ("D12A" models) or 18-75V ("D48A" models). All A-Series UWR models are fully EMI
characterized and agency safety approved.
A-Series DC/DCâs are extremely reliable, easy-to-use, cost-effective power converters. Use
them to improve the reliability of existing equipment or to develop new systems that exceed design
objectives.
+VIN
(1)
âVIN
(2)
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
+VOUT
(3)
COMMON
(5)
Typical topology is shown
PWM
CONTROLLER
OPTO
ISOLATION
Figure 1. Simpliï¬ed Schematic
REFERENCE &
ERROR AMP
MDC_UWR6-10W Series.B05 Page 1 of 6
|
▷ |