|
UWQ-12-Q48 Datasheet, PDF (1/18 Pages) Murata Manufacturing Co., Ltd. – Wide Input, Isolated DOSA Quarter Brick DC/DC Converters | |||
|
www.murata-ps.com
UWQ-12/17-Q48 Series
Wide Input, Isolated DOSA Quarter Brick DC/DC Converters
Typical unit
FEATURES
ï®ï Fixed DC outputs, 12V @17A
ï®ï Industry standard quarter brick 2.3â x 1.45â x
0.46â open frame package
ï®ï Wide range 18 to 75 Vdc input voltages with
2250 Volt Basic isolation
ï®ï Remote ON/Off enable control
ï®ï DOSA-compatible pinouts and form factor
ï®ï High efï¬ciency synchronous rectiï¬er topology
ï®ï Stable no-load operation
ï®ï Monotonic startup into pre-bias output condition
ï®ï Certiï¬ed to UL/EN 60950-1, CSA-C22.2 No.
60950-1, 2nd edition safety approvals
ï®ï Extensive self-protection, OVP, input undervolt-
age, current limiting and thermal shutdown
PRODUCT OVERVIEW
The UWQ series offers high output current (up to
17 Amps) in an industry standard âquarter brickâ
package requiring no heat sink for most applica-
tions. The UWQ series delivers ï¬xed DC output
voltages up to 204 Watts (12V @17A) for printed
circuit board mounting. Wide range inputs of 18
to 75 Volts DC (48 Volts nominal) are ideal for
datacom and telecom systems.
Advanced automated surface mount assembly
and planar magnetics deliver galvanic isolation
rated at 2250 Vdc for basic insulation. To power
digital systems, the outputs offer fast settling to
current steps and tolerance of higher capacitive
loads. Excellent ripple and noise speciï¬cations as-
sure compatibility to CPUâs, ASICâs, programmable
logic and FPGAâs. No minimum load is required.
For systems needing controlled startup/shutdown,
an external remote On/Off control may use either
positive or negative polarity.
A wealth of self-protection features include
input undervoltage lockout and overtemperature
shutdown using an on-board temperature sensor;
overcurrent protection using the âhiccupâ auto-
restart technique, provides indeï¬nite short-circuit
protection, along with output OVP. The synchronous
rectiï¬er topology offers high efï¬ciency for minimal
heat generation and âno heat sinkâ operation. The
UWQ series is certiï¬ed to safety standards UL/
EN/IEC/CSA 60950-1, 2nd edition. It meets RFI/
EMI conducted/radiated emission compliance to
EN55022, CISPR22 with an external ï¬lter.
APPLICATIONS
ï®ï Embedded systems, datacom and telecom
installations, wireless base stations
ï®ï Disk farms, data centers and cellular repeater sites
ï®ï Remote sensor systems, dedicated controllers
ï®ï Instrumentation systems, R&D platforms, auto-
mated test ï¬xtures
ï®ï Data concentrators, voice forwarding and
speech processing systems
F1
+Vin (1)
External
DC
Power
Source
On/Off
Control
(2)
Open = On
polarity)
-Vin (3)
Barrier
Controller
and Power
Reference and
Error Ampliï¬er
Figure 1. Connection Diagram
Typical topology is shown. Murata Power Solutions recommends an external fuse.
+Vout (8)
-Vout (4)
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_UWQ-12/17-Q48 Series.A01.D7 Page 1 of 17
|
▷ |