TPS_CPCI200D Datasheet, PDF (1/5 Pages) Murata Manufacturing Co., Ltd. – 200W 3Ux4HP DC/DC CompactPCI Power Supply

cPCI200D Series
200W 3Ux4HP DC/DC CompactPCI™ Power Supply
FEATURES
3Ux4HP Package
180/225W Power at 0-50ºC
PICMG 2.11 Compliant
RoHS Compliant
Wide range 36-72Vdc Input Range
IPMI Option
47-pin I/O Connector
70% Efficiency
Hot-Swap Capable
SELECTION GUIDE
Model Number
Power
Output Current
IPMI Production Status
5V 3.3V 12V -12V
cPCI200D-1
180W
18A¹ 27A 4A¹ 4A¹
No
Consult Factory
No
cPCI200D-2
225W
27A 27A² 4A² 4A²
No
Consult Factory
No
cPCI200D-3
180W
18A¹ 27A 4A¹ 4A¹ Yes
Consult Factory
No
cPCI200D-4
225W
27A 27A² 4A² 4A² Yes
Consult Factory
No
cPCI200D-1C
180W
18A¹ 27A 4A¹ 4A¹
No
Active
Yes
cPCI200D-2C
225W
27A 27A² 4A² 4A²
No
Active
Yes
cPCI200D-3C
180W
18A¹ 27A 4A¹ 4A¹ Yes
Active
Yes
cPCI200D-4C
225W
27A 27A² 4A² 4A² Yes
Active
Yes
INPUT CHARACTERISTICS
Parameter
Input Operating Voltage
Input Voltage Withstand
Inrush Current
Conditions
36Vdc input
72Vdc input
Min Typ Max Units
36
72 Vdc
34
75 Vdc
20
Apk
40
Apk
DESCRIPTION
The cPCI200 is a family of high-reliability, 200W,
3Ux4HP CompactPCI™ power supplies operating
from a nominal 48Vdc input. The use of our pat-
ented V-Series topology yields high efficiency which
consequently permits packaging of this product in a
compact, single card slot format (4HP).
ORing diodes and current sharing allow the cPCI200
to be operated in N+n parallel-redundant configura-
tions. Available with an IPMI interface option, the
cPCI200 was designed for hot-swap, redundant
configurations to support high-availability (HA)
telecom applications.
With a widerange input of 36-72Vdc, safety agency
approvals to UL60950 and EN60950,EMI compliance
to ETSI and Telcordia standards, the cPCI200 was
designed with globally-deployed systems in mind.
Additional features include remote sense compen-
sation, unit enable control (EN#), output inhibit con-
trol (INH#), output fault signal (FAL#), and thermal
warning signal (DEG#). LEDs are provided for visual
indication of input power presence, output inhibit,
and output fault condition.
The 4HP package and complement of global
safety agency approvals provide for an advanced,
high-density, high-efficiency power solution for
your CompactPCI requirements.
Ḥ
For full details go to
www.murata-ps.com/rohs
OUTPUT CHARACTERISTICS
Parameter
Output Voltage Regulation³
Temperature Coefficient
PARD (V1 & V2)
PARD (V3 & V4)
Output Power, CPCI200D-1 & -3
Output Power, CPCI200D-2 & -4
Transient Response
Over-Voltage Protection
Minimum Load⁴
Remote Sense Compensation
Current Share Tolerance⁵
Isolation
Conditions
Outputs V1 & V2
Outputs V3 &V4
20MHz bandwidth
20MHz bandwidth
50ºC, 300lfm airflow
70ºC, 300lfm airflow
50ºC, 300lfm airflow
70ºC, 300lfm airflow
ΔV, 50% load step
Settling time
V1 & V2
V1 & V2
V1&V2; full load
Pri-Sec
Pri-Chassis
Sec-Chassis
Min Typ Max Units
-2
+4 %Vnom
-10
+10 %Vnom
0.02 %/ºC
50 mVp-p
120 180 mVp-p
0
180
W
0
90
W
0
225
W
0
110
W
±10 %Vnom
500 μsec
125 135 %Vnom
500
mA
50
mV
±10 %Itot
1.5
kVac
1.5
kVac
500
Vac
Notes:
1. Maximum combined power from outputs V1, V3, & V4 not to exceed 90W.
2. Maximum combined power from outputs V2, V3, & V4 not to exceed 90W.
3. Total regulation includes line, load, and cross regulation.
4. Minimum load requirement of 500mA is required on V1 for 180W models and on V2 for 225W models.
5. Current share circuit is primary-referenced.
ISO9001
CERTIFIED
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
cPCI200D Series.B01 Page 1 of 5