SNAP910 Datasheet, PDF (1/3 Pages) Murata Manufacturing Co., Ltd. – 900MHz High-Speed Frequency Hopping Network Access Point

Features:
• 900 MHz frequency hopping spread
spectrum technology
• Serial-to-Ethernet conversion
• Seamless roaming capability
• 172.8Kbps data rate throughput
• 20+ mile range with omni anntenna
• FCC certified
Benefits:
• License-free operation
• Immunity to jamming and multipath
fading
• Allows non-Ethernet devices to connect
to Ethernet network
• Supports far-ranging mobile
applications
• Shortens time to market
• Simple installation
DEVELOPER KIT
(Info: click here)
SNAP910
900MHz
High-Speed
Frequency
Hopping
Network Access
Point
Designed for use as a base station for WIT910-based products, the SNAP910 provides seamless Ethernet
connectivity for remote serial devices. The SNAP910 connects up to 15 WIT910 wireless remotes to a 10/
100Base-T Ethernet network. The SNAP910 also is ideal for use as access points for a network of RFM HN-
91 Series modems. Multiple SNAPs can be co-located to support larger numbers of remote devices. Certified
by the FCC, the SNAP910 can be used license-free in the US.
Specifications
RF Frequency
Radio Certification
Operating Range
Radio Network Topology
Radio Network Protocol
Configuration Interface
I/O Data Rate
RF Data Rate
# of Frequency Channels
RF Bandwidth
Transmit Power Output
Receiver Sensitivity
Supply voltage
Power consumption
Size (mm)
Weight
Case Material
Operating Temperature
Humidity
902MHz to 927MHz
Certified under FCC Part 15.247, license free
Indoor: 1000’ outdoor: >20 miles with omni-directional antenna
Star network
Dynamically assigned TDMA with ARQ
Asynchronous (RS-232) up to 115.2 Kbps
10 Mbps Ethernet to the SNAP, 115.2Kbps to each radio
172.8Kbps
54
460 KHz
10 mW, 100 mW or 500mW, software selectable
-103 dBm for 10-5 BER
9vdc
4.5W
201 x 144 x 53
727g
Ruggedized aluminum
-300C to 700C
20% to 90% (non-condensing)
SNAP910
www.RFM.com E-mail: [e-mail]
©2008 by RF Monolithics, Inc.
Page 1 of 3
SNAP910 - 4/10/08