SF2076B Datasheet, PDF (1/11 Pages) RF Monolithics, Inc – 464.00 MHz SAW Filter

Preliminary
®
SF2076B
• Designed for 802.16 and WIMAX Receiver IF Application
• Low Insertion Loss
• 5.0 X 7.0 mm or Single Ended Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS) _Pb
464.00 MHz
SAW Filter
Absolute Maximum Ratings
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Temperature
Electrical Characteristics
Characteristic
Nominal Center Frequency
Insertion Loss
Passband Variation; CF ±1.70 MHz
CF ±1.85 MHz
Group Delay Variation; CF ±1.7 MHz
Return Loss
Triple Transit (reference to time domain main lobe peak)
after 1-2us
after 2-3us
after >3us
Rejection
DC to 264 MHz
264 to 368 MHz
368 to 424 MHz
424 to 460.65 MHz
467.35 to 664 MHz
664 to 954 MHz
Maximum Peak RF Input Power
Maximum RF Input Power Over Life
Life of Part
Temperature
Operating
Storage
Case Style
Lid Symbolization (YY=year, WW=week, S=shift)
Value
Units
+13
dBm
30
VDC
-40 to +85
°C
260°C for 30 s
SMP-03
Sym
f_C
Notes
1
Min
Typ
Max
464.000
9.5
10.5
0.7
1.5
3
200
300
10
33
35.6
10
11.8
33
35.7
40
43.2
30
40
50
40
40
30
13
10
25
-40
85
-40
85
SMP-03 7 x 5 mm Nominal Footprint
RFM SF2076B YYWWS
Units
MHz
dB
dB p-p
nsec
dB
dB
dBm
dBm
years
°C
I. 200 ohm Matching .............................page 2
II. 200 ohm Matching Toko Inductor .....page 5
III. SMI 7035 Matching ........................page 8
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 Ω and measured with 50 Ω network analyzer.
2. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance
matching design. See Application Note No. 42 for details.
3. The design, manufacturing process, and specifications of this filter are subject to change.
4. Tape and Reel Standard ANSI / EIA 481.
5. US and international patents may apply.
6. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
7. ©Copyright 1999, RF Monolithics Inc.
8. Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc. Phone: [phone]
Fax: [phone]
RFM Europe
Phone: [phone]
Fax: [phone]
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [e-mail]
http://www.rfm.com
SF2076B-062106
Page 1 of 11