RO3023 Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – 433.97 MHz SAW Resonator

RO3023
• Ideal for European 433.92 MHz Transmitters
• Low Series Resistance
• Quartz Stability
• Rugged, Hermetic, Low-Profile TO39 Case
The RO3023 is a true one-port, surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It
provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating
at 433.92 MHz. The RO3023 is designed specifically for remote-control and wireless security devices
operating in Europe under ETSI I-ETS 300 220 and in Germany under FTZ 17 TR 2100.
Absolute Maximum Ratings
Rating
Value
Units
CW RF Power Dissipation
(See: Typical Test Circuit)
+0
dBm
DC Voltage Between Any Two Pins
(Observe ESD Precautions)
±30
VDC
Case Temperature
Soldering Temperature (10 seconds / 5 cycles max.)
-40 to +85
°C
260
°C
433.97 MHz
SAW
Resonator
TO39-3 Case
Electrical Characteristics
Characteristic
Center Frequency at +25 °C
Insertion Loss
Quality Factor
Temperature Stability
Absolute Frequency
Tolerance from 433.970 MHz
Unloaded Q
50 W Loaded Q
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
Frequency Aging
Absolute Value during the First Year
DC Insulation Resistance between Any Two Pins
RF Equivalent RLC Model Motional Resistance
Motional Inductance
Motional Capacitance
Pin 1 to Pin 2 Static Capacitance
Transducer Static Capacitance
Test Fixture Shunt Inductance
Lid Symbolization
Sym
f_C
Δf_C
IL
Q_U
Q_L
T_O
f_O
FTC
|fA|
R_M
L_M
C_M
C_O
C_P
L_TEST
Notes
2, 3, 4, 5
2, 5, 6
5, 6, 7
6, 7, 8
1
5
5, 7, 9
5, 6, 9
5, 6, 7, 9
2, 7
Minimum
433.895
Typical
2.5
8,500
2200
10
25
f_c + 2.3
0.037
≤10
1.0
34.5
107
1.3
2.1
1.8
68.2
RFM RO3023 Datecode
Maximum
434.045
±75
4.8
40
Units
MHz
kHz
dB
°C
kHz
ppm/°C²
ppm/yr
MΩ
Ω
µH
fF
pF
pF
nH
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Frequency aging is the change in f_C with time and is specified at +65°C or
less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture,
decreasing in subsequent years.
2. The center frequency, f_C, is measured at the minimum insertion loss point,
IL_MIN, with the resonator in the 50 Ω test system (VSWR ≤ 1.2:1). The
shunt inductance, L_TEST, is tuned for parallel resonance with C_O at f_C.
3. One or more of the following United States patents apply: 4,454,488 and
4,616,197.
4. Typically, equipment utilizing this device requires emissions testing and
government approval, which is the responsibility of the equipment
manufacturer.
5. Unless noted otherwise, case temperature T_C = +25°C±2°C.
6. The design, manufacturing process, and specifications of this device are
subject to change without notice.
7. Derived mathematically from one or more of the following directly
measured parameters: f_C, IL, 3 dB bandwidth, f_C versus T_C, and C_O.
8. Turnover temperature, T_O, is the temperature of maximum (or turnover)
frequency, f_O. The nominal frequency at any case temperature, T_C, may
be calculated from: f = f_O [1 - FTC (T_O -T_C)²]. Typically, oscillator T_O is
20°C less than the specified resonator T_O.
9. This equivalent RLC model approximates resonator performance near the
resonant frequency and is provided for reference only. The capacitance
C_O is the static (nonmotional) capacitance between Pin1 and Pin 2
measured at low frequency (10 MHz) with a capacitance meter. The
measurement includes case parasitic capacitance with a floating case.
For usual grounded case applications (with grund connected to either Pin
1 or Pin 2 and to the case), add approximately 0.25 pF to C_O.
www.RFM.com E-mail: [e-mail]
©2008 by RF Monolithics, Inc.
Page 1 of 2
RO3023 - 3/26/08