RF3608D Datasheet, PDF (1/10 Pages) RF Monolithics, Inc – 426.4 MHz SAW Filter

• 418.00 to 434.79 MHz Filter
• Optimized for use with the TRC105 Transceiver
• Balanced 150 ohm IC Interface
• Complies with Directive 2002/95/EC (RoHS) _Pb
Absolute Maximum Ratings
Rating
Input Power Level
DC Voltage
Operating Temperature Range
Storage Temperature Range in Tape and Reel
Electrical Characteristics
Characteristic
Center Frequency
1 dB Bandwidth
Maximum Insertion Loss, 418.00 to 434.79 MHz
Amplitude Ripple, p-p, 418 to 434.79 MHz
Rejection Referenced to Insertion Loss at 433.00 MHz:
DC to 406 MHz
456 to 470 MHz
470 to 870 MHz
870 to 1300 MHz
1300 to 1735 MHz
1735 to 2000 MHz
Source Impedance
Balanced Load Impedance
Case Style
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator
Standard Reel Quantity Reel Size 7 Inch
Reel Size 13 Inch
Electrical Connections
Connection
Single-ended Port
Balanced Port
Case Ground
No Connection
Terminals
6
1, 3
4, 5, 7, 8
2
RF3608D
426.4 MHz
SAW Filter
Value
+15
±5
-40 to +85
-40 to +85
Units
dBm
V
°C
°C
SM3838-8
Sym Notes
Min
f_C
BW₁
IL_MAX
Typ
426.4
19.5
1.8
Max
2.8
1.0
Units
MHz
MHz
40
43
dB
33
36
40
43
37
40
29
32
24
27
Z_S
50
Ω
Z_L
150
Ω
SM3838-8 3.8 x 3.8 mm Nominal Footprint
891, YWWS
500 Pieces/Reel
3000 Pieces/Reel
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. US and international patents may apply.
6. RFM, stylized RFM logo, and RF Monolithics, Inc., are registered trademarks of RF Monolithics, Inc.
www.RFM.com E-mail: [e-mail]
©2009-2010 by RF Monolithics, Inc.
Page 1 of 10
RF3608D - 6/9/10