|
OKR-T-10-W12 Datasheet, PDF (1/9 Pages) Murata Manufacturing Co., Ltd. – Adjustable Output 10-Amp SIP-mount DC/DC Converters | |||
|
www.murata-ps.com
OKR-T/10-W12 Series
Adjustable Output 10-Amp SIP-mount DC/DC Converters
PRODUCT OVERVIEW
The OKR-T/10 series are SIP non-isolated Point-of-Load (PoL) DC/DC power converters measuring
only 0.41 x 0.65 x 0.3 inches (10.4 x 16.5 x 7.62 mm). The wide input range is 4.5 to 14 Volts DC. Based
on 600 KHz synchronous buck topology, the high power conversion efï¬cient Point of Load (PoL) module
features programmable output voltage and On/Off control, under voltage lock out (UVLO), overcurrent and
over temperature protections. These units meet all standard UL/EN/ IEC 60950-1 safety certiï¬cations and
RoHS-6 hazardous substance compliance.
Typical unit
FEATURES
 600 KHz operation
 4.5-14 Vdc input voltage range
 Programmable output voltage from 0.591-6.0 VDC
 Drives up to 200 μF ceramic capacitive loads
 High power conversion efï¬ciency at 92%
 Outstanding thermal derating performance
 Over temperature and over current protection
 On/Off control
 SIP, 0.41 x 0.65 x 0.3 inches (10.4 x 16.5 x 7.62 mm).
 Meets UL/EN/IEC 60950-1 safety certiï¬cation
 RoHS-6 hazardous substance compliance
Contents
Page
Description, Connection Diagram, Photograph
1
Ordering Guide, Model Numbering, Product Label
2
Mechanical Speciï¬cations, Input/Output Pinout
3
Detailed Electrical Speciï¬cations
4
Trim Connections, Soldering Guidelines
5
Application Notes
6
Performance Data
8
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Common
Ḥ
For full details go to
www.murata-ps.com/rohs
Figure 1. Simpliï¬ed Block Diagram
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Ampliï¬er
+Vout
Trim
Common
www.murata-ps.com
email: sales@murata-ps.com
MDC_14 Jan 2010 MDC_OKR-T/10-W12 Series.A02_long Page 1 of 9
|
▷ |