|
OKI-T36W-W40 Datasheet, PDF (1/12 Pages) Murata Manufacturing Co., Ltd. – Selectable Output 36-Watt DOSA-SMT DC/DC Converters | |||
|
www.murata-ps.com
OKI-T/36W-W40 Series
Selectable Output 36-Watt DOSA-SMT DC/DC Converters
Typical unit
PRODUCT OVERVIEW
The OKI-T/36W-W40 are non-isolated Point-of-
Load (PoL) DC/DC power converters for embedded
applications. The module is fully compatible with
Distributed-power Open Standards Alliance (DOSA)
industry-standard speciï¬cations (www.dosapower
.com).
The wide input range is 19 to 40 Volts DC. Power
output is 36 watts at Vout = 12Vdc. Based on ï¬xed-
frequency synchronous buck converter switching
topology, the high power conversion efï¬cient Point
of Load (POL) module features an On/Off control.
These converters also include under voltage lock
out (UVLO), output short circuit protection, over-
current and over temperature protections.
These units are designed to meet all standard
UL/EN/IEC 60950-1 safety certiï¬cations and RoHS-
6 hazardous substance compliance.
FEATURES
â Non-isolated SMT PoL DC/DC power module
â 19-40Vdc input voltage range
â Selectable output voltage 5.021-15.5Vdc
â Up to 3 Amps output
â Drives 1000 μF ceramic capacitive loads
â High power conversion efï¬ciency
â Outstanding thermal derating performance
â Over temperature and over current protection
â On/Off control, positive or negative polarity
â UL/EN/IEC 60950-1 safety (pending)
â Industry-standard (DOSA) surface-mount package
â RoHS-6 hazardous substance compliance
Contents
Page
Description, Connection Diagram, Photograph
1
Ordering Guide, Model Numbering, Product Labeling
2
Mechanical Speciï¬cations, Input/Output Pinout
3
Detailed Electrical Speciï¬cations
4
Output Voltage Adjustment, Soldering Guidelines
5
Application Notes
6
Performance Data and Oscillograms
9
Connection Diagram
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Ampliï¬er
Common
Figure 1. OKI-T/36W-W40
Note: Murata Power Solutions strongly recommends an external input fuse, F1.
See speciï¬cations.
+Vout
Trim
Common
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
email: sales@murata-ps.com
09 Feb 2011 MDC_OKI-T/36W-W40.A01 Page 1 of 12
|
▷ |