|
NMXD0515SOC Datasheet, PDF (1/3 Pages) Murata Manufacturing Co., Ltd. – Isolated 5W Regulated Single & Dual Output DC/DC Converters | |||
|
www.murata-ps.com NOT RECOMMENDED
NMXSO Series
FOR NEW DESIGNS Isolated 5W Regulated Single & Dual Output DC/DC Converters
SELECTION GUIDE
Order Code
FEATURES
 RoHS compliant
 Single or dual output
 1kVDC isolation
 Pin compatible with NMXU series
 Power density 0.53W/cm3
 UL 94V-0 package material
 Footprint 9.52cm2
 Industry standard pinout
 5V & 12V input
 5V & 15V output
 Short circuit protected
 Internal SMD construction
 Fully encapsulated with toroidal magnetics
 Output regulation 0.5%
 PCB mounting
DESCRIPTION
The NMXSO series of DC/DC converters is
particularly suited to isolating and/or converting
DC power rails. The galvanic isolation allows the
device to be conï¬gured to provide an isolated
negative rail in systems where only positive rails
exist. The devices are particularly suited for use
in distributed power systems where there is low
variation in the bus voltage levels.
V
V
A
%
pF
W kHrs
NMXD1215SOC
12
±15 ±0.2
65
65.7 6.0 61
NMXS0505SOC
5
5
1.0
65
37.4 5.0 811
NMXS1205SOC
NMXD0505SOC
12
5
1.0
65
46.6 5.0 177
Obsolete
Recommended
Alternative
5
±5 ±0.5
65
30.5 5.0 565 BWR-5/700-D5A-C
NMXD0515SOC
5
±15 ±0.2
65
36.6 6.0 83
NCS6D1215C
NMXD1205SOC
12
±5 ±0.5
65
40.5 5.0 162 BWR-5/900-D12A-C
NMXS0515SOC
5
15
0.4
65
33.3 6.0 157 UWR-15/530-D5A-C
NMXS1215SOC
12
15
0.4
65
60.0 6.0 93 UWR-15/665-D12A-C
NMXD0512SOC
Obsolete
n/a
NMXD1212SOC Obsolete, recommended alternative: (click for data sheet) NCS6D1212C
NMXS0512SOC
Obsolete
n/a
NMXS1212SOC Obsolete, recommended alternative: (click for data sheet) NCS6S1212C
When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external
capacitance value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the
additional external capacitance for reliable start up.
INPUT CHARACTERISTICS
Parameter
Conditions
Voltage range
Continuous operation, 5V input types
Continuous operation, 12V input types
Reï¬ected ripple voltage BW=DC to 20MHz, all output types
Min. Typ. Max. Units
4.5 5.0 5.5
V
10.8 12.0 13.2
150 mV
OUTPUT CHARACTERISTICS
Parameter
Conditions
Rated power
TA= 0°C to 70°C
Voltage output accuracy
Line regulation
High VIN to low VIN
Load Regulation
10% load to rated load
Ripple and Noise
BW=DC to 20MHz, all output types
Min. Typ. Max. Units
5.0 W
±3
%
±0.5 %
0.5 %
150 mV p-p
ABSOLUTE MAXIMUM RATINGS
Short-circuit protection2
Lead temperature 1.5mm from case for 10 seconds
Input voltage VIN, NMXSO05 types
Input voltage VIN, NMXSO12 types
15 seconds
300°C
7V
15V
1. Calculated using MIL-HDBK-217F with nominal input voltage at full load.
2. Supply voltage must be disconnected at the end of the short circuit duration.
All speciï¬cations typical at TA=25°C, nominal input voltage and rated output current unless otherwise speciï¬ed.
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
KDC_NMXSO.E01 Page 1 of 3
|
▷ |