|
NFM41PC204F1H3L Datasheet, PDF (1/1 Pages) Murata Manufacturing Co., Ltd. – EMIFIL (Capacitor type) Single Circuit Type for Large Current | |||
|
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
Data Sheet
1
EMIFILr (Capacitor type) Single Circuit Type for Large Current
NFM41P Series (1806 Size)
c Dimensions
0.4±0.3
1.5±0.3
1.6±0.3
0.7 min.
4.5±0.3
(2)
(1)
(3)
(2)
0.3+â00..23
: Electrode
(in mm)
c Insertion Loss Characteristics (Main Items)
0
(50Ω - 50Ω)
20
40
60
80
100
1
NFM41PC204F1H3
NFM41PC155B1E3
10
100
Frequency (MHz)
1000 3000
c Equivalent Circuit
c Packaging
Code
Packaging
L
180mm Embossed Tape
B
Bulk(Bag)
Minimum Quantity
4000
500
Input (Output)
(1)
GND
(2)
Output (Input)
(3)
No polarity.
c Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
NFM41PC204F1H3p
0.2µF 80/-20%
2A
NFM41PC155B1E3p
1.5µF ±20%
6A
Number of Circuit: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Rated Voltage
50Vdc
25Vdc
Insulation Resistance (min.)
1000M ohm
300M ohm
Operating
Temperature Range
-55 to +85°C
-55 to +85°C
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering proï¬le
where peak solder temperature is below the Tin melting
point is used. Please conï¬rm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, itâs speciï¬cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical speciï¬cations because there is no space for detailed speciï¬cations. Therefore, please approve our product
speciï¬cations or transact the approval sheet for product speciï¬cations before ordering.
2011.11.2
http://www.murata.com/
|