NFM18PS105R0J3D Datasheet, PDF (1/1 Pages) Murata Manufacturing Co., Ltd. – EMIFIL (Capacitor type) Single Circuit Type for Large Current

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
Data Sheet
1
EMIFILr (Capacitor type) Single Circuit Type for Large Current
NFM18PS Series (0603 Size)
c Dimensions
(2)
(1)
0.15+–00..12
0.2 min. (3)
(2)
1.6±0.1
0.8+–00..12
0.4±0.1
: Electrode
(in mm)
c Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
20
NFM18PS474R0J3
NFM18PS105R0J3
40
60
80
100
0.1
1
10
100
1000
6000
Frequency (MHz)
c Equivalent Circuit
c Packaging
Code
Packaging
D
180mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
4000
500
Input (Output)
(1)
GND
(2)
Output (Input)
(3)
No polarity.
c Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
NFM18PS474R0J3p
0.47µF ±20%
2A
NFM18PS105R0J3p
1.0µF ±20%
2A
Number of Circuit: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Rated Voltage
6.3Vdc
6.3Vdc
Insulation Resistance (min.)
1000M ohm
500M ohm
Operating
Temperature Range
-55 to +125°C
-55 to +105°C
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/