NFL18ST207X1C3D Datasheet, PDF (1/1 Pages) Murata Manufacturing Co., Ltd. – EMIFILr (LC Combined) Multilayer Type NFL18ST Series (0603 Size)

Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type
Data Sheet
1
EMIFILr (LC Combined) Multilayer Type
NFL18ST Series (0603 Size)
I Dimensions
0.2 min. 0.2 min.
(2)
(1)
0.25±0.1
(2)
0.4±0.1
1.6±0.1
(3)
0.25±0.1
0.8±0.1
I Equivalent Circuit
: Electrode
(in mm)
Input
(1)
Output
(3)
I Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFL18ST507X1C3
20
NFL18ST307X1C3
NFL18ST207X1C3
40
60
80
1
10
100
1000
5000
Frequency (MHz)
I Packaging
Code
Packaging
D
180mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
4000
1000
GND
(2)
No Polarity.
I Rated Value (p: packaging code)
Part Number
NFL18ST207X1C3p
NFL18ST307X1C3p
NFL18ST507X1C3p
Number of Circuits: 1
Nominal Cut-off Frequency Capacitance Inductance Rated Voltage Rated Current
200MHz
300MHz
500MHz
25pF+20%-20% 110nH+20%-20%
18pF+20%-20% 62nH+20%-20%
10pF+20%-20% 43nH+20%-20%
16Vdc
16Vdc
16Vdc
150mA
200mA
200mA
Insulation Resistance (min.)
1000M ohm
1000M ohm
1000M ohm
Operating
Temperature Range
-55°C to +125°C
-55°C to +125°C
-55°C to +125°C
I !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.5.1
http://www.murata.com/