MPD6S022S Datasheet, PDF (1/9 Pages) Murata Manufacturing Co., Ltd. – High efficiency and small size and floor space saving

MPD6S022S Application
1
DC-DC Converter Application Manual
MPD6S022S
Features
ï½¥ 3.0-5.5V input voltage.
ï½¥ High efficiency (95% typ.@3.3V/1A) and small size and floor space saving.
･ Wide output voltage 1.1～3.6V range.
(Output voltage is adjustable.)
ï½¥ Input and output voltage capacitor is built in.
ï½¥ Short circuit protection is built in.(Latch format)
1. Appearance , Dimensions
21.0max.
9.0max.
MPD6S022S
Body
21.0max.
Overcoat Resin
Possible to expose substrate
a 2a a a a a a a
Pin No. 1^{ï½¥ ï½¥ ï½¥ ï½¥ ï½¥ ï½¥ ï½¥ ï½¥}10
Lead
3.0 min.
(0.27)
2.7 max.
Impossible to expose electrode
Pin
(0.5)
7.4 max.
【Unit：mm】
( )…reference value
Pin Pitch a= 1.8 ±0.3mm
Distance between the both roots of Pin.
Tolerance is not accumulated.
Pin plating ：SnCu
Expanded Schematic of PinTerminal edge
Body
Border Resin
Pin
2. Pin Number and Function
Pin No.
1
2
3
4
5
6,7
8
9,10
Symbol
VIN
ON/OFF
NO PIN
N.C.
N.C
GND
ADJUST
VOUT
Input
Remote ON/OFF
Function
Internal used
Internal used
GND
Output voltage adjustment
Output
GND terminals（Pin No.6 and No.7）should be connected to each other on your substrate in the shortest distance.
VOUT terminals（Pin No.9 and No.10）should be connected to each other on your substrate in the shortest distance.
N.C.（Pin No.4 and No.5）are used in the inside of this product. These pins should not be used in the outside.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2008.1.18