LQW18CN85NJ00D Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type for Choke)

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type for Choke)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type for Choke)
LQW18C Series (0603 Size)
c Dimensions
c Packaging
Code
Packaging
D
180mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
4000
500
1.6±0.15
0.8±0.15
0.4±0.1
0.4±0.1
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Test Frequency Rated Current
LQW18CN4N9D00p
4.9nH ±0.5nH
10MHz
2600mA
LQW18CN15NJ00p
15nH ±5%
10MHz
2200mA
LQW18CN33NJ00p
33nH ±5%
10MHz
1700mA
LQW18CN55NJ00p
55nH ±5%
10MHz
1500mA
LQW18CN85NJ00p
85nH ±5%
10MHz
1400mA
LQW18CNR10K00p
100nH ±10%
10MHz
1000mA
LQW18CNR12J00p
120nH ±5%
10MHz
1100mA
LQW18CNR16J00p
160nH ±5%
10MHz
1000mA
LQW18CNR21J00p
210nH ±5%
10MHz
800mA
LQW18CNR27J00p
270nH ±5%
10MHz
750mA
LQW18CNR33J00p
330nH ±5%
10MHz
630mA
LQW18CNR39J00p
390nH ±5%
10MHz
620mA
LQW18CNR47J00p
470nH ±5%
10MHz
500mA
LQW18CNR56J00p
560nH ±5%
10MHz
450mA
LQW18CNR65J00p
650nH ±5%
10MHz
430mA
Class of Magnetic Shield: No magnetic shield
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Only for reflow soldering.
Max. of DC Resistance Self Resonance Frequency (min.)
0.015ohm
0.025ohm
0.035ohm
0.045ohm
0.060ohm
0.10ohm
0.085ohm
0.10ohm
0.15ohm
0.16ohm
0.25ohm
0.28ohm
0.45ohm
0.48ohm
0.52ohm
2300MHz
2000MHz
1800MHz
1600MHz
1380MHz
1260MHz
1200MHz
900MHz
720MHz
660MHz
600MHz
570MHz
555MHz
540MHz
510MHz
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.11.2
http://www.murata.com/