LQW18AN27NG10D Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound
Data Sheet
1
Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound
LQW18A_10 Series (High Q/Low DC Resistance Type) (0603 Size)
c Dimensions
1.6±0.2
0.80±0.15
*¹ 0.8±0.2
*¹ LQW18AN_10: 0.8±0.3
c Packaging
Code
Packaging
D
180mm Paper Tape
J
330mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
4000
10000
500
0.3±0.1
0.3±0.1
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQW18AN2N2D10p 2.2nH ±0.5nH 100MHz
1400mA
LQW18AN3N9C10p 3.9nH ±0.2nH 100MHz
1000mA
LQW18AN3N9D10p 3.9nH ±0.5nH 100MHz
1000mA
LQW18AN5N6D10p 5.6nH ±0.5nH 100MHz
900mA
LQW18AN6N8C10p 6.8nH ±0.2nH 100MHz
900mA
LQW18AN6N8D10p 6.8nH ±0.5nH 100MHz
900mA
LQW18AN8N2D10p 8.2nH ±0.5nH 100MHz
800mA
LQW18AN10NG10p 10nH ±2%
100MHz
800mA
LQW18AN10NJ10p 10nH ±5%
100MHz
800mA
LQW18AN12NG10p 12nH ±2%
100MHz
750mA
LQW18AN12NJ10p 12nH ±5%
100MHz
750mA
LQW18AN15NJ10p 15nH ±5%
100MHz
700mA
LQW18AN18NG10p 18nH ±2%
100MHz
700mA
LQW18AN18NJ10p 18nH ±5%
100MHz
700mA
LQW18AN22NG10p 22nH ±2%
100MHz
640mA
LQW18AN22NJ10p 22nH ±5%
100MHz
640mA
LQW18AN27NG10p 27nH ±2%
100MHz
590mA
LQW18AN27NJ10p 27nH ±5%
100MHz
590mA
LQW18AN33NJ10p 33nH ±5%
100MHz
550mA
Operating Temperature Range (Self-temperature rise is not included): -55 to +125°C
Only for reflow soldering.
0.018ohm
0.032ohm
0.032ohm
0.045ohm
0.045ohm
0.045ohm
0.058ohm
0.058ohm
0.058ohm
0.071ohm
0.071ohm
0.085ohm
0.085ohm
0.085ohm
0.099ohm
0.099ohm
0.116ohm
0.116ohm
0.132ohm
25
250MHz
38
250MHz
38
250MHz
38
250MHz
38
250MHz
38
250MHz
38
250MHz
38
250MHz
38
250MHz
38
250MHz
38
250MHz
42
250MHz
42
250MHz
42
250MHz
42
250MHz
42
250MHz
42
250MHz
42
250MHz
42
250MHz
18000MHz
11000MHz
11000MHz
10000MHz
7000MHz
7000MHz
7000MHz
5000MHz
5000MHz
5000MHz
5000MHz
4500MHz
3500MHz
3500MHz
3200MHz
3200MHz
2800MHz
2800MHz
2500MHz
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.11.2
http://www.murata.com/