LQW15AN1N3C10D Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound
Data Sheet
1
Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound
LQW15A_10 Series (High Q/Low DC Resistance Type) (0402 Size)
I Dimensions
1.0±0.1
0.5±0.1
0.6±0.1
I Packaging
Code
Packaging
D
180mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
10000
500
0.2±0.1
0.2±0.1
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQW15AN1N3C10p 1.3nH±0.2nH 100MHz
LQW15AN1N3D10p 1.3nH±0.5nH 100MHz
LQW15AN2N2C10p 2.2nH±0.2nH 100MHz
LQW15AN2N2D10p 2.2nH±0.5nH 100MHz
LQW15AN2N4D10p 2.4nH±0.5nH 100MHz
LQW15AN3N3D10p 3.3nH±0.5nH 100MHz
LQW15AN3N4C10p 3.4nH±0.2nH 100MHz
LQW15AN3N4D10p 3.4nH±0.5nH 100MHz
LQW15AN3N6C10p 3.6nH±0.2nH 100MHz
LQW15AN3N6D10p 3.6nH±0.5nH 100MHz
LQW15AN3N9D10p 3.9nH±0.5nH 100MHz
LQW15AN4N7D10p 4.7nH±0.5nH 100MHz
LQW15AN5N1C10p 5.1nH±0.2nH 100MHz
LQW15AN5N1D10p 5.1nH±0.5nH 100MHz
LQW15AN5N6C10p 5.6nH±0.2nH 100MHz
LQW15AN5N6D10p 5.6nH±0.5nH 100MHz
Operating Temperature Range: -55°C to +125°C
Only for reflow soldering.
1200mA
1200mA
1000mA
1000mA
1000mA
900mA
900mA
900mA
900mA
900mA
900mA
800mA
800mA
800mA
800mA
800mA
0.017ohm
0.017ohm
0.027ohm
0.027ohm
0.027ohm
0.040ohm
0.040ohm
0.040ohm
0.040ohm
0.040ohm
0.040ohm
0.051ohm
0.051ohm
0.051ohm
0.051ohm
0.051ohm
20
250MHz
20
250MHz
25
250MHz
25
250MHz
25
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
30
250MHz
16.0GHz
16.0GHz
14.0GHz
14.0GHz
14.0GHz
12.0GHz
12.0GHz
12.0GHz
9.5GHz
9.5GHz
7.0GHz
8.0GHz
8.0GHz
8.0GHz
8.0GHz
8.0GHz
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/