LQM2MPN_GH Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – LQM2MPN_GH Series 2016/0806 (mm/inch) Inductors (Coils) for Power Lines

Data Sheet
LQM2MPN_GH Series 2016/0806 (mm/inch)
Multi-
General ^layer
Thickness _LowRdc
1.0mm
Bias
Reflow
RoHS
max.
OK
Inductors (Coils) for Power Lines
1
c Dimensions
0.5±0.2
c Packaging
Code
Packaging
L
ø180mm Embossed taping
Minimum Quantity
3000
2.0±0.3
1.6±0.2
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance ^Inductance
Rated current
Rated current
DC resistance ^{Self resonance}
test frequency (Based on Inductance change) (Based on Temperature rise)
frequency (min.)
LQM2MPNR16MGHp 0.16µH ʶ20%
LQM2MPNR24MGHp 0.24µH ʶ20%
LQM2MPNR33MGHp 0.33µH ʶ20%
LQM2MPNR47MGHp 0.47µH ʶ20%
LQM2MPNR68MGHp 0.68µH ʶ20%
LQM2MPN1R0MGHp 1.0µH ʶ20%
LQM2MPN1R5MGHp 1.5µH ʶ20%
LQM2MPN2R2MGHp 2.2µH ʶ20%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
4.8A
4.0A
3.2A
3.2A
2.1A
1.6A
1.5A
1.0A
4.0A
3.4A
3.1A
2.5A
1.9A
1.9A
1.5A
1.0A
0.014Њʶ25%
0.020Њʶ25%
0.024Њʶ25%
0.037Њʶ25%
0.060Њʶ25%
0.064Њʶ25%
0.104Њʶ25%
0.210Њʶ25%
150MHz
130MHz
90MHz
80MHz
60MHz
60MHz
50MHz
40MHz
Class of magnetic shield: Magnetic shield of ferrite
Operating temperature range: -40ʙ85ˆ
Only for reflow soldering.
c Notice (Rating)
When applied Rated current to the Products,
Inductance will be within ±30% of initial Inductance
value.
When applied Rated current to the Products, self
temperature rise shall be limited to 40°C max.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2013.7.8
http://www.murata.com/