|
LQM21FN100M70L Datasheet, PDF (1/1 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Multilayer Type for Choke) | |||
|
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Multilayer Type for Choke)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Multilayer Type for Choke)
LQM21F_70 Series (0805 Size)
c Dimensions
0.5±0.3
c Packaging
Code
Packaging
L
180mm Embossed Tape
B
Bulk(Bag)
Minimum Quantity
3000
1000
1.25±0.2
2.0±0.2
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Test Frequency
Rated Current
LQM21FN4R7M70p
4.7µH ±20%
1MHz
LQM21FN100M70p
10µH ±20%
1MHz
Class of Magnetic Shield: Magnetic shield of ferrite
Operating Temperature Range (Self-temperature rise is not included): -55 to +125°C
120mA
100mA
DC Resistance
0.35ohm ±30%
0.60ohm ±30%
Self Resonance Frequency (min.)
25MHz
15MHz
c Impedance-Frequency Characteristics (Typ.)
10000
c Inductance-Current Characteristics (Typ.)
100
1000
100
10μH
10
4.7μH
10μH
10
4.7μH
1
1
1
10
100
1000
Frequency (MHz)
0.1
1
10
100
Current (mA)
1000
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering proï¬le
where peak solder temperature is below the Tin melting
point is used. Please conï¬rm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, itâs speciï¬cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical speciï¬cations because there is no space for detailed speciï¬cations. Therefore, please approve our product
speciï¬cations or transact the approval sheet for product speciï¬cations before ordering.
2011.9.8
http://www.murata.com/
|