LQH88PN1R0N38L Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type) LQH88P Series

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH88P Series (3131 Size)
I Dimensions
8.0±0.2
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
250
1000
8.0±0.2
1.9±0.2
1.9±0.2
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
LQH88PN1R0N38p
LQH88PN1R5N38p
LQH88PN2R2N38p
LQH88PN3R3N38p
LQH88PN4R7N38p
LQH88PN6R8N38p
LQH88PN100M38p
LQH88PN150M38p
LQH88PN220M38p
LQH88PN330M38p
LQH88PN470M38p
LQH88PN680M38p
LQH88PN101M38p
1.0µH±30%
1.5µH±30%
2.2µH±30%
3.3µH±30%
4.7µH±30%
6.8µH±30%
10µH±20%
15µH±20%
22µH±20%
33µH±20%
47µH±20%
68µH±20%
100µH±20%
11.20A
8.50A
8.00A
7.00A
6.00A
4.50A
3.60A
3.00A
2.70A
1.90A
1.50A
1.25A
1.00A
8.00A
7.10A
6.40A
5.00A
4.20A
3.80A
3.15A
2.45A
2.25A
1.75A
1.45A
1.10A
1.00A
Test Frequency: 100kHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40°C to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
DC Resistance
Self Resonance
Frequency (min.)
0.006ohm±30%
0.008ohm±30%
0.009ohm±30%
0.013ohm±30%
0.017ohm±30%
0.022ohm±30%
0.029ohm±30%
0.041ohm±30%
0.066ohm±30%
0.095ohm±30%
0.157ohm±30%
0.190ohm±30%
0.265ohm±30%
100MHz
60MHz
50MHz
35MHz
30MHz
20MHz
18MHz
13MHz
10MHz
9MHz
7MHz
7MHz
4MHz
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/