LQH6PPN3R3N43L Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH6PP Series (2424 Size)
I Dimensions
6.0±0.2
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
250
1500
6.0±0.2
1.65±0.2 1.65±0.2
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
LQH6PPN1R0N43p
LQH6PPN1R5N43p
LQH6PPN2R2N43p
LQH6PPN3R3N43p
LQH6PPN4R7M43p
LQH6PPN6R8M43p
LQH6PPN100M43p
LQH6PPN150M43p
LQH6PPN220M43p
LQH6PPN330M43p
LQH6PPN470M43p
LQH6PPN680M43p
LQH6PPN101M43p
1.0µH±30%
1.5µH±30%
2.2µH±30%
3.3µH±30%
4.7µH±20%
6.8µH±20%
10µH±20%
15µH±20%
22µH±20%
33µH±20%
47µH±20%
68µH±20%
100µH±20%
7.50A
6.50A
5.60A
4.50A
4.00A
3.20A
2.60A
2.20A
1.70A
1.60A
1.25A
1.10A
0.92A
4.30A
4.15A
4.10A
3.80A
3.20A
2.85A
2.60A
2.20A
1.55A
1.29A
1.10A
1.00A
0.80A
Test Frequency: 100kHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40°C to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
DC Resistance
Self Resonance
Frequency (min.)
0.009ohm±30%
0.010ohm±30%
0.014ohm±30%
0.016ohm±30%
0.020ohm±30%
0.028ohm±30%
0.044ohm±30%
0.065ohm±30%
0.108ohm±30%
0.137ohm±30%
0.230ohm±30%
0.289ohm±30%
0.436ohm±30%
110MHz
60MHz
30MHz
30MHz
25MHz
20MHz
15MHz
10MHz
10MHz
6MHz
6MHz
5MHz
3MHz
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/