LQH6PP Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH6PP Series (2424 Size)
I Dimensions
6.0±0.2
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
250
1500
6.0±0.2
1.65±0.2 1.65±0.2
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance
Inductance
Test Frequency
Allowable DC Current
(Based on Temperature Rise)
Allowable DC Current
(Based on Inductance Change)
DC Resistance
Self Resonance
Frequency (min.)
Class of Magnetic Shield
LQH6PPN1R0N43p 1.0µH±30% 100kHz
4.30A
LQH6PPN1R5N43p 1.5µH±30% 100kHz
4.15A
LQH6PPN2R2N43p 2.2µH±30% 100kHz
4.10A
LQH6PPN3R3N43p 3.3µH±30% 100kHz
3.80A
LQH6PPN4R7M43p 4.7µH±20% 100kHz
3.20A
LQH6PPN6R8M43p 6.8µH±20% 100kHz
2.85A
LQH6PPN100M43p 10µH±20% 100kHz
2.60A
LQH6PPN150M43p 15µH±20% 100kHz
2.20A
LQH6PPN220M43p 22µH±20% 100kHz
1.55A
LQH6PPN330M43p 33µH±20% 100kHz
1.29A
LQH6PPN470M43p 47µH±20% 100kHz
1.10A
LQH6PPN680M43p 68µH±20% 100kHz
1.00A
LQH6PPN101M43p 100µH±20% 100kHz
0.80A
7.50A
0.009ohm±30% 110MHz Magnetic shield of magnetic powder in resin
6.50A
0.010ohm±30% 60MHz
Magnetic shield of magnetic powder in resin
5.60A
0.014ohm±30% 30MHz
Magnetic shield of magnetic powder in resin
4.50A
0.016ohm±30% 30MHz
Magnetic shield of magnetic powder in resin
4.00A
0.020ohm±30% 25MHz
Magnetic shield of magnetic powder in resin
3.20A
0.028ohm±30% 20MHz
Magnetic shield of magnetic powder in resin
2.60A
0.044ohm±30% 15MHz
Magnetic shield of magnetic powder in resin
2.20A
0.065ohm±30% 10MHz
Magnetic shield of magnetic powder in resin
1.70A
0.108ohm±30% 10MHz
Magnetic shield of magnetic powder in resin
1.60A
0.137ohm±30% 6MHz
Magnetic shield of magnetic powder in resin
1.25A
0.230ohm±30% 6MHz
Magnetic shield of magnetic powder in resin
1.10A
0.289ohm±30% 5MHz
Magnetic shield of magnetic powder in resin
0.92A
0.436ohm±30% 3MHz
Magnetic shield of magnetic powder in resin
Operating Temperature Range: -40 to +85°C
Only for reflow soldering.
I Notice (Allowable DC Current)
<Allowable DC Current>
When Allowable DC Current is applied to the
Products, self-generation of heat will rise to
40°C or less.
When Allowable DC Current is applied to the
Products, Inductance will be within +-30% of
nominal Inductance value.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.4.30
http://www.murata.com/