LQH5BPN1R5NT0L Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH5BP_T0 Series (2020 Size)
c Dimensions
5.0±0.2
c Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
500
3000
5.0±0.2
1.5±0.2 1.5±0.2
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Rated Current
Rated Current
(Based on Inductance Change) (Based on Temperature Rise)
LQH5BPNR47NT0p 0.47µH ±30%
7.7A
LQH5BPN1R0NT0p 1.0µH ±30%
5.8A
LQH5BPN1R2NT0p 1.2µH ±30%
5.4A
LQH5BPN1R5NT0p 1.5µH ±30%
5.0A
LQH5BPN2R2NT0p 2.2µH ±30%
4.0A
LQH5BPN2R7NT0p 2.7µH ±30%
3.8A
LQH5BPN3R3NT0p 3.3µH ±30%
3.5A
LQH5BPN4R7NT0p 4.7µH ±30%
3.0A
LQH5BPN6R8NT0p 6.8µH ±30%
2.5A
LQH5BPN100MT0p 10µH ±20%
2.0A
LQH5BPN150MT0p 15µH ±20%
1.6A
LQH5BPN220MT0p 22µH ±20%
1.4A
Test Frequency: 100kHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40 to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
Only for reflow soldering.
4.0A
3.1A
3.1A
3.0A
2.6A
2.5A
2.3A
2.0A
1.65A
1.60A
1.20A
1.05A
DC Resistance
0.012ohm ±20%
0.019ohm ±20%
0.019ohm ±20%
0.024ohm ±20%
0.030ohm ±20%
0.035ohm ±20%
0.044ohm ±20%
0.058ohm ±20%
0.083ohm ±20%
0.106ohm ±20%
0.187ohm ±20%
0.259ohm ±20%
Self Resonance
Frequency (min.)
220MHz
90MHz
90MHz
70MHz
55MHz
50MHz
40MHz
40MHz
30MHz
25MHz
18MHz
15MHz
c Notice (Rated Current)
When Rated Current is applied to the Products,
Inductance will be within ±30% of nominal
Inductance value.
When Rated Current is applied to the Products,
self-generation of heat will rise to 40°C or less.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.11.2
http://www.murata.com/