LQH44PN6R8MP0L Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductors (Chip Coils) for DC-DC Converter Wire Wound Type

Inductors(coils)/Microchip Transformer > Chip Inductors (Chip Coils) > for DC-DC Converter Wire Wound Type
Data Sheet
1
Chip Inductors (Chip Coils) for DC-DC Converter Wire Wound Type
LQH44P Series (1515 Size)
I Dimensions
3.7±0.2
4.0±0.2
4.0±0.2
2.4 min.
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
1000
3500
1.2±0.2 1.0 min. 1.2±0.2
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance
Inductance
Test Frequency
Allowable DC Current
(Based on Temperature Rise)
Allowable DC Current
(Based on Inductance Change)
DC Resistance
Self Resonance
Frequency (min.)
Class of Magnetic Shield
LQH44PN1R0NP0p 1.0µH±30% 1MHz
LQH44PN2R2MP0p 2.2µH±20% 1MHz
LQH44PN3R3MP0p 3.3µH±20% 1MHz
LQH44PN4R7MP0p 4.7µH±20% 1MHz
LQH44PN6R8MP0p 6.8µH±20% 1MHz
LQH44PN100MP0p 10µH±20% 1MHz
LQH44PN220MP0p 22µH±20% 1MHz
2450mA
1800mA
1770mA
1700mA
1340mA
1170mA
790mA
2950mA
2500mA
2100mA
1700mA
1400mA
1150mA
800mA
0.030ohm±20% 90MHz
0.049ohm±20% 70MHz
0.065ohm±20% 50MHz
0.080ohm±20% 40MHz
0.12ohm±20% 35MHz
0.16ohm±20% 25MHz
0.37ohm±20% 17MHz
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Operating Temperature Range: -40°C to +85°C
Only for reflow soldering.
I Notice (Allowable DC Current)
<Allowable DC Current>
When Allowable DC Current is applied to the
Products, self-generation of heat will rise to
40°C or less.
When Allowable DC Current is applied to the
Products, Inductance will be within +-30% of
nominal Inductance value.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.1.8
http://www.murata.com/