LQH43MN1R0M03L Datasheet, PDF (1/3 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) for General Use Wire Wound Type LQH43M/LQH43N Series

Inductors (Coils) > Chip Inductor (Chip Coil) > for General Use Wire Wound Type
Data Sheet
1
Chip Inductor (Chip Coil) for General Use Wire Wound Type
LQH43M/LQH43N Series (1812 Size)
I Dimensions
3.6±0.2
4.5±0.3
3.2±0.2
3.2±0.2
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
500
2500
1.0min. 1.0min. 1.0min.
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQH43MN1R0M03p
LQH43MN1R2M03p
LQH43MN1R5M03p
LQH43MN1R8M03p
LQH43MN2R2M03p
LQH43MN2R7M03p
LQH43MN3R3M03p
LQH43MN3R9M03p
LQH43MN4R7K03p
LQH43MN5R6K03p
LQH43MN6R8K03p
LQH43MN8R2K03p
LQH43MN100J03p
LQH43MN100K03p
LQH43MN120J03p
LQH43MN120K03p
LQH43MN150J03p
LQH43MN150K03p
LQH43MN180J03p
LQH43MN180K03p
LQH43MN220J03p
LQH43MN220K03p
LQH43MN270J03p
LQH43MN270K03p
1.0µH±20%
1.2µH±20%
1.5µH±20%
1.8µH±20%
2.2µH±20%
2.7µH±20%
3.3µH±20%
3.9µH±20%
4.7µH±10%
5.6µH±10%
6.8µH±10%
8.2µH±10%
10µH±5%
10µH±10%
12µH±5%
12µH±10%
15µH±5%
15µH±10%
18µH±5%
18µH±10%
22µH±5%
22µH±10%
27µH±5%
27µH±10%
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
1MHz
500mA
500mA
500mA
500mA
500mA
500mA
500mA
500mA
500mA
500mA
450mA
450mA
400mA
400mA
380mA
380mA
360mA
360mA
340mA
340mA
320mA
320mA
300mA
300mA
0.20ohm
0.20ohm
0.30ohm
0.30ohm
0.30ohm
0.32ohm
0.35ohm
0.38ohm
0.40ohm
0.47ohm
0.50ohm
0.56ohm
0.56ohm
0.56ohm
0.62ohm
0.62ohm
0.73ohm
0.73ohm
0.82ohm
0.82ohm
0.94ohm
0.94ohm
1.1ohm
1.1ohm
20
1MHz
20
1MHz
20
1MHz
20
1MHz
20
1MHz
20
1MHz
20
1MHz
20
1MHz
30
1MHz
30
1MHz
30
1MHz
30
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
35
1MHz
120MHz
100MHz
85MHz
75MHz
62MHz
53MHz
47MHz
41MHz
38MHz
33MHz
31MHz
27MHz
23MHz
23MHz
21MHz
21MHz
19MHz
19MHz
17MHz
17MHz
15MHz
15MHz
14MHz
14MHz
Class of Magnetic Shield: No magnetic shield Operating Temperature Range: -40°C to +85°C
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/