LQH43CN100K03L Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type for Choke)

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type for Choke)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type for Choke)
LQH43C Series (1812 Size)
I Dimensions
3.6±0.2
3.2±0.2
I Packaging
Code
Packaging
L
180mm Embossed Tape
Minimum Quantity
500
4.5±0.3
3.2±0.2
1.0min. 1.0min. 1.0min.
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance Test Frequency Rated Current Max. of DC resistance
LQH43CN1R0M03p 1.0µH±20%
LQH43CN1R5M03p 1.5µH±20%
LQH43CN2R2M03p 2.2µH±20%
LQH43CN3R3M03p 3.3µH±20%
LQH43CN4R7M03p 4.7µH±20%
LQH43CN6R8M03p 6.8µH±20%
LQH43CN100K03p
10µH±10%
LQH43CN150K03p
15µH±10%
LQH43CN220K03p
22µH±10%
LQH43CN330K03p
33µH±10%
LQH43CN470K03p
47µH±10%
LQH43CN680K03p
68µH±10%
LQH43CN101K03p 100µH±10%
LQH43CN151K03p 150µH±10%
LQH43CN221K03p 220µH±10%
LQH43CN331K03p 330µH±10%
LQH43CN471K03p 470µH±10%
Class of Magnetic Shield: No magnetic shield
1MHz
1080mA
0.08ohm
1MHz
1000mA
0.09ohm
1MHz
900mA
0.11ohm
1MHz
800mA
0.13ohm
1MHz
750mA
0.15ohm
1MHz
720mA
0.20ohm
1MHz
650mA
0.24ohm
1MHz
570mA
0.32ohm
1MHz
420mA
0.6ohm
1MHz
310mA
1.0ohm
1MHz
280mA
1.1ohm
1MHz
220mA
1.7ohm
1MHz
190mA
2.2ohm
1MHz
130mA
3.5ohm
1MHz
110mA
4.0ohm
1MHz
100mA
6.8ohm
1kHz
90mA
8.5ohm
Operating Temperature Range: -40°C to +85°C
Self Resonance Frequency (min.)
100MHz
85MHz
60MHz
47MHz
35MHz
30MHz
23MHz
20MHz
15MHz
12MHz
10MHz
8.4MHz
6.8MHz
5.5MHz
4.5MHz
3.6MHz
3.0MHz
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/