LQH3NP Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH3NP_J0 Series (1212 Size)
I Dimensions
Polarity Marking
3.0±0.2
3.0±0.2
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
1000
5000
0.9±0.2
0.9±0.2
(in mm)
I Rated Value (p: packaging code)
Part Number
Inductance
Inductance
Test Frequency
Allowable DC Current
(Based on Temperature Rise)
Allowable DC Current
(Based on Inductance Change)
DC Resistance
Self Resonance
Frequency (min.)
Class of Magnetic Shield
LQH3NPN1R0NJ0p 1.0µH±30% 1MHz
LQH3NPN1R5NJ0p 1.5µH±30% 1MHz
LQH3NPN2R2NJ0p 2.2µH±30% 1MHz
LQH3NPN3R3NJ0p 3.3µH±30% 1MHz
LQH3NPN4R7NJ0p 4.7µH±30% 1MHz
LQH3NPN6R8NJ0p 6.8µH±30% 1MHz
LQH3NPN100NJ0p 10µH±30% 1MHz
LQH3NPN150NJ0p 15µH±30% 1MHz
LQH3NPN220MJ0p 22µH±20% 1MHz
LQH3NPN220NJ0p 22µH±30% 1MHz
LQH3NPN330MJ0p 33µH±20% 1MHz
LQH3NPN330NJ0p 33µH±30% 1MHz
LQH3NPN470MJ0p 47µH±20% 1MHz
LQH3NPN470NJ0p 47µH±30% 1MHz
1620mA
1500mA
1460mA
1270mA
1120mA
850mA
710mA
590mA
510mA
510mA
410mA
410mA
350mA
350mA
1650mA
1200mA
1150mA
950mA
780mA
700mA
560mA
440mA
350mA
350mA
280mA
280mA
200mA
200mA
0.040ohm±20%
0.055ohm±20%
0.069ohm±20%
0.105ohm±20%
0.130ohm±20%
0.210ohm±20%
0.300ohm±20%
0.440ohm±20%
0.600ohm±20%
0.600ohm±20%
0.900ohm±20%
0.900ohm±20%
1.30ohm±20%
1.30ohm±20%
140MHz
90MHz
90MHz
70MHz
65MHz
45MHz
35MHz
30MHz
25MHz
25MHz
20MHz
20MHz
15MHz
15MHz
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Magnetic shield of magnetic powder in resin
Operating Temperature Range: -40 to +85°C
Only for reflow soldering.
I Notice (Allowable DC Current)
<Allowable DC Current>
When Allowable DC Current is applied to the
Products, self-generation of heat will rise to
40°C or less.
When Allowable DC Current is applied to the
Products, Inductance will be within +-30% of
nominal Inductance value.
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.4.30
http://www.murata.com/