|
HHXB160ARA820MF61G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS | |||
|
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount
HXB New!
Series
ã»High reliability and high voltage are realized by hybrid electrolyte
ã»Endurance with ripple current : 5,000 hours at 105â
ã»Rated voltage range : 16 to 80Vdc, Capacitance range : 6.8 to 470μF
ã»For high reliability applications.
(Automotive equipment, Base station equipment, etc.)
ã»RoHS Compliant
ã»Halogen Free
HXA P70
Higher temperature
HXB
âSPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-55 to +105â
16 to 80Vdc
±20% (M)
I=0.01CV
Where, I : Max. leakage current (μAï¼, C: Nominal capacitance(μFï¼, V : Rated voltage(V)
Rated voltage(Vdc)
16V 25V 35V 50V 63V 80V
tanδï¼Max.)
0.16 0.14 0.12 0.10 0.08 0.08
(at 20â, 120Hz)
(at 20â after 2 minutes)
(at 20â, 120Hz)
Z(-25â)/Z(+20â)â¦1.5
Z(-55â)/Z(+20â)â¦2.0
(at 100kHz)
The following speciï¬cations shall be satisï¬ed when the capacitors are restored to 20â after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 â.
Capacitance change
â¦Â±30% of the initial value
D.F. (tanδ)
⦠200% of the initial speciï¬ed value
ESR
⦠200% of the initial speciï¬ed value
Leakage current
⦠The initial speciï¬ed value
The following speciï¬cations shall be satisï¬ed when the capacitors are restored to 20â after exposing them for 1,000 hours at 105 â
without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS
C 5101-4.
Capacitance change
â¦Â±30% of the initial value
D.F. (tanδ)
⦠200% of the initial speciï¬ed value
ESR
⦠200% of the initial speciï¬ed value
Leakage current
⦠The initial speciï¬ed value
âDIMENSIONS [mm]
âTerminal Code : A
Vent for JA0
W
Size Code ÏD L A B C
W
P
F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
0.3max.
L±0.3 (Note)
A±0.2
Note : L±0.5 for HA0 and JA0
âPART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
H HXB
A RA
M
G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470, 100µF:101)
Taping code
Terminal code
Voltage code (ex. 35V:350, 50V:500)
Series code
Category
Please refer to "Product code guide (conductive polymer type)"
âMARKING
EX) 35V47µF
26A
47
V HB
âRated Voltage Symbol
Rated voltage (Vdc)
16
25
35
50
63
80
Symbol
C
E
V
H
J
K
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
72
CAT. No. E1001P
|
▷ |