HHXA160ARA820MF61G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Conductive Polymer Hybrid Aluminum Electrolytic Capacitors

Engineering Bulletin Introductory
No.830I/May.2014
HXASeries
● High reliability and high voltage are realized by hybrid electrolyte
● Endurance with ripple current : 4,000 hours at 125℃
● Rated voltage range : 16 to 80Vdc, Capacitance range : 10 to 470μF
● For high temperature and high reliability applications.
(Automotive equipment, Base station equipment, etc.)
Conductive Polymer Hybrid
Aluminum Electrolytic Capacitors
◆ SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-55 to +125℃
16 to 80Vdc
±20%（M）
I=0.01CV
Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V)
Rated voltage (Vdc)
16V 25V 35V 50V 63V 80V
tanδ(Max.)
0.16 0.14 0.12 0.10 0.08 0.08
(at 20℃ , 120Hz)
(at 20℃ after 2 minutes)
(at 20℃ , 120Hz)
Z(-25℃ ) / Z(+20℃ ) ≦ 1.5
Z(-55℃ ) / Z(+20℃ ) ≦ 2.0
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃ .
Capacitance change ≦ ±30％ of the initial value
D.F. (tanδ)
ESR
Leakage current
≦ 200％ of the initial specified value
≦ 200％ of the initial specified value
≦ The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦ ±30％ of the initial value
D.F. (tanδ)
≦ 200％ of the initial specified value
ESR
≦ 200％ of the initial specified value
Leakage current
≦ The initial specified value
◆ DIMENSIONS　［mm］
●Terminal Code : A
Vent for JA0
⊕_W
0.3max.
L±0.3(Note)
Note : L±0.5 for HA0 and JA0
A±0.2
⊖
Size Code φD L A B C
W
P
F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
◆ PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
H HXA
A RA
M
G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47μF:470, 100μF:101)
Taping code
Terminal code
Voltage code (ex. 35V:350)
Series code
Category
◆ MARKING
EX) 35V47μF
26A
⊖ ⁴⁷ ⊕
V ^HA
●Rated voltage symbol
Rated voltage (Vdc)
16
25
35
50
63
80
Symbol
C
E
V
H
J
K
Please contact us for mass production schedule.
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1698 1