DE1E3KX152MB5 Datasheet, PDF (1/1 Pages) Murata Manufacturing Co., Ltd. – Safety Standard Certified Type KX (Reinforced Insulation)

Capacitors > Safety Standard Certified Ceramic Cap.
Data Sheet
Safety Standard Certified
Type KX (Reinforced Insulation)
(UL, CSA, IEC60384-14 ClassX1/Y1)
DE1E3KX152MB5BA01 (E, 1500pF, AC250V)
RoHS regulation conformity parts
D max.
T max.
e
ød
F±0.8
Lead Code
B5
Coating Extension e
Up to the end of crimp
(in mm)
ød
0.6±^00..105
I Dimensions
Body Diameter D
Body Thickness T
Lead Spacing F
Lead Diameter ød
Coating Extension e
9mm max.
8.0mm max.
10.0mm ±0.8mm
0.6mm +0.1/-0.05mm
Up to the end of crimp
I Rated Value
Murata PN Code
Spec
Temperature Char.
E3
E, +20/-55%
Capacitance
152
1500pF
Capacitance Tol.
M
±20%
Safety Standard Certified Type
KX
X1,Y1: AC250V(r.m.s.)
I Lead Style
Code
B5
Lead Style
Vertical crimp short
I Packaging
Code
Packaging
B
Bulk
Please refer to 'Packaging' for the details.
Minimum Quantity
500
I Specifications
Please refer to
'Saferty standard certified Type KY/KH/KX
Specifications and Test Methods'
PDF file.
I Standard Certification
UL
CSA
VDE
BSI
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IMQ
Standard No.
UL1414
CSA E60384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
IEC 60384-14
EN 60384-14
EN 60384-14
Certified No.
E37921
1343810
40002831
Rated Voltage
KM 37901
812158
314577
24191
P08209173
08.0707
V4069
AC250V(r.m.s.)
• The certification number might change due to revision of the application
standard and changes in the range of acquisition.
• Please contact us when the certification of Chinese Safety Standard or South
Korean Safety Standard is necessary.
o This data sheet is applied for SAFETY STANDARD CERTIFIED CERAMIC CAPACITOR Type KX used for General Electronics equipment for your design.
<Notice>
o Bonding, resin molding and coating
In case of bonding, molding or coating this product, verify that these processes do not affect the quality of capacitor by testing the performance of the
bonded, molded or coated product in the intended equipment. The variation in thickness of adhesive or molding resin or coating may cause an outer coating
resin cracking and/or ceramic element cracking of a capacitor in a temperature cycling.
o Plese refer to 'Caution' and 'Notice' for the other details.
• The RoHS compliance means that we judge from EU Directive 2002/95/EC the products do not contain lead, cadmium, mercury, hexavalent
chromium, PBB and PBDE, except exemptions stated in EU Directive 2002/95/EC annex and impurities existing in natural world.
• This statement does not insure the compliance of any of the listed parts with any laws or legal imperatives developed by any EU members
individually with regards to the RoHS Directive.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.7.7
http://www.murata.com/