|
D1U3CS-D-850-12-HC3C Datasheet, PDF (1/6 Pages) Murata Manufacturing Co., Ltd. – 81mm 1U Front End AC-DC Power Supply Converter | |||
|
www.murata-ps.com
D1U3CS-W-850-12-HxxC Series
81mm 1U Front End AC-DC Power Supply Converter
FEATURES
 850W output power
 80 PLUS® Gold efï¬ciency
 12V main output
 3.3V or 5V standby output of 20W
 1U height: 3.20" x 11.00" x 1.57"
 15.4 Watts per cubic inch density
 N+1 redundancy capable,
including hot plugging (up to 4 in parallel)
 Active current sharing on 12V main output;
ORing FET
 Overvoltage, overcurrent,
overtemperature protection
 Internal cooling fan (variable speed)
 PMBus⢠/ I²C interface
 RoHS compliant
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
Available now at
www.murata-ps.com/en/3d/acdc.html
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
PRODUCT OVERVIEW
The D1U3CS-W-850-12-HxxC series are 80 PLUS Gold efï¬ciency 850 watt, power factor corrected front
end supplies with a 12V main output and a 3.3V (20W) standby. They have active current sharing and up to
4 supplies may be operated in parallel. The supplies may be hot plugged, they recover from overtempera-
ture faults, and have logic and PMBus status signals. Their low proï¬le 1U package and >15W/cubic inch
power density make them ideal for delivering reliable, efï¬cient power to servers, workstations, storage
systems and other 12V distributed power systems.
ORDERING GUIDE
Part Number
Power Output
Main
Output
Standby Output1 Airï¬ow
D1U3CS-W-850-12-HC4C
D1U3CS-W-850-12-HC3C
850W
12V
3.3V
Back to front
Front to back
INPUT CHARACTERISTICS
Parameter
Voltage Operating Range
Frequency
Turn-on Voltage
Turn-off Voltage
Maximum Current
Inrush Current
Power Factor
Efï¬ciency (230Vac) excluding fan
load
Conditions
Ramp up
Ramp down
850W, 100Vac
Cold start between 0 to 200msec
At 230Vac, full load
20% load
50% load
100% load
Min. Nom. Max. Units
90 115/230 264 Vac
47 50/60 63 Hz
73
90
Vac
10 Arms
25 Apk
0.98
88
89
92
93.5
%
88
93
OUTPUT VOLTAGE CHARACTERISTICS
Output
Voltage
Parameter
Conditions
Min. Typ. Max. Units
12V
3.3VSB
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise2
Output Current
Load Capacitance
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise2
Output Current
50% load
20MHz Bandwidth
50% load
20MHz Bandwidth
11.97 12.0 12.02
11.4
12.6
Vdc
120 mV p-p
0
69.2
A
10000 μF
3.28 3.3 3.32
3.13
3.46
Vdc
50 mV p-p
0
6
A
Load Capacitance
350
μF
1 For 5vSB, contact Murata Sales for availablity.
2 Ripple and noise are measured with 0.1 μF of ceramic capacitance and 10 μF of tantalum capacitance on each of the power supply
outputs. A short coaxial cable with 50Ω scope termination is used.
CB
Test Certiï¬cate
and Test Report
D1U3CS-W-850-12-HxxC.A03 Page 1 of 6
|
▷ |