CSAC4.00MGC-TC Datasheet, PDF (1/17 Pages) Murata Manufacturing Co., Ltd. – MHz Chip Type -Tight Frequency Tolerance for Automotive-

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
P16E.pdf
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Jul.15,2011
o Part Numbering
CERALOCKr (MHz)
(Part Number)
qProduct ID
Product ID
CS
CS T CE 16M0 V 5 3 *** -R0
q w e r tyu i o
Ceramic Resonators
wFrequency/Capacitance
Code
A
T
Frequency/Capacitance
MHz with No capacitance built-in
MHz with Built-in Capacitance
eStructure/Size
Code
LS
CC
CR/CE/CG
CV
CW
Structure/Size
Round Lead Type
Cap Chip Type
Small-cap Chip Type
Monolithic Chip Type
Small Monolithic Chip Type
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M".
tDesign
Code
Design
Gpp
Thickness Shear mode
T/Vpp
Thickness Expander mode
Xpp
Thickness Expander mode (3rd overtone)
pp indicates initial frequency tolerance and load capacity.
yInitial Frequency Tolerance
Code
5
3
2
1
H
Design
±0.5%
±0.3%
±0.2%
±0.1%
±0.07%
uLoad Capacity
Code
1
2
3
4
5
6
Design
5/6pF
10pF
15pF
22pF
30/33/39pF
47pF
iIndividual Specification
Code
Individual Specification
Three-digit alphanumerics express
***
"Individual Specification".
With standard products, "iIndividual Specification" is omitted.
oPackaging
Code
Packaging
-B0
Bulk
-A0
Radial Taping H₀=18mm
-R0
Plastic Taping ø=180mm
-R1
Plastic Taping ø=330mm
Radial taping is applied to lead type and plastic taping to chip type.
3